
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

Y3S1 Design Engineering Project - Engineering Product Development (EPD) 30.007: Back Documentation Sensing Monitor
30.007 main module PCB is an open-source printed circuit board by lucyy05, from the lucyy05/30.007_main_module_PCB repository on GitHub. It is a 2-layer board of 82.5 × 66.7 mm with 7 parts on 19 nets, routed with 70 tracks and 0 vias.
Its parts include 2 resistors, 2 ICs, 2 connectors and 1 switch. It belongs with the ESP32 boards of this library.
KiCad source files for the main module PCB of the 30.007 project. This is the completed trigger/control board: pressing the fire switch powers up the ESP32-S3-ZERO, which starts the solenoid firing process in the separate solenoid circuit.
J3,
3-pin Molex KK).U1) steps 12 V down to 4.5 V to power the ESP32-S3-ZERO (U2).SW1 (Cherry MX keyboard switch) gates power to the ESP32 — when it is on/pressed, the
ESP32 powers up and begins the firing process.J2) links this board to the other circuit that drives the
solenoids.| Ref | Component | Role |
|---|---|---|
U1 | LM2596 module | Buck converter: 12 V → 4.5 V |
U2 | ESP32-S3-ZERO | Main controller (receives 4.5 V) |
SW1 | Cherry MX PCB switch | Fire/power switch for the ESP32 |
J2 | JST-GH 4-pin (SMD) | Connection to the solenoid firing circuit |
J3 | Molex KK 3-pin (THT) | 12 V power source input |
R7, R8 | 10 kΩ THT resistors | I2C (SCL/SDA) pull-ups |
| Path | Contents |
|---|---|
30.007_main_module_PCB.kicad_pro | KiCad project file (open this to start) |
30.007_main_module_PCB.kicad_sch | Schematic |
30.007_main_module_PCB.kicad_pcb | PCB layout |
Symbols/ | Custom schematic symbols (e.g. ESP32-S3-ZERO) |
Footprint/ | Custom footprints (ESP32-S3-ZERO module, LM2596, Cherry MX) |
Prod/ | Fabrication outputs (Gerbers + drill files) |
fp-lib-table, sym-lib-table | KiCad library tables |
30.007_main_module_PCB.kicad_pro.Backups, cache files, local project settings (.kicad_prl), and archive files are excluded via
.gitignore.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10k | Resistor_THT:R_Bare_Metal_Element_L12.4mm_W4.8mm_P11.40mm | R7, R8 |
| 1 | Conn_01x03_Pin | Connector_Molex:Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_01x04_Pin | Connector_JST:JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J2 |
| 1 | ESP32-S3-ZERO | Library:MODULE_ESP32-S3-ZERO | U2 |
| 1 | SW_Push | Library:SW_Cherry_MX_PCB_1.00u | SW1 |
| 1 | ~ | Library:LM2596 | U1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 82.5 × 66.7 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lucyy05/30.007_main_module_PCB repository on GitHub, at the commit this page was made from: the board is 30.007_main_module_PCB.kicad_pcb and its schematic 30.007_main_module_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lucyy05 before reusing the design.