Skip to the content
2 layers101.6 × 76.2 mmBreakoutBoard, the printed circuit board in 3D

A modular development kit for the Electrosmith Daisy Seed development board. Currently modules include the central breakout board, a MIDI adapter and an array of 16 potentiometers.

Size
101.6 × 76.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
42
Pads
143
Tracks, vias
173, 0
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
2 Nov 2023
Updated
16 Aug 2024

Overview

BreakoutBoard is an open-source printed circuit board by lucidcoding, from the lucidcoding/daisy-seed-development-kit repository on GitHub. It is a 2-layer board of 101.6 × 76.2 mm with 14 parts on 42 nets, routed with 173 tracks and 0 vias.

It belongs with the microcontroller boards boards of this library.

README

README.md

Daisy Seed Development Kit

Author

Paul Davies

Description

A modular development kit for the Electrosmith Daisy Seed development board. Currently modules include the central breakout board, a MIDI adapter and an array of 16 potentiometers. The breakout board includes connections for a second potentiometer array, SPI, I2C, an encoder and an SD card.

Environment Setup

Ensure you have LIBDAISY_DIR and DAISYSP_DIR environment variables set and pointing to the relevant libraries. If you are using Windows, ensure they use the forward slash. If you are on Linux, ensure the capitalisation is correct. You'll make your life a lot easier if you don't have spaces in the path:

text
LIBDAISY_DIR=/path/to/libdaisy
DAISYSP_DIR=/path/to/daisysp

Getting up and running

In order to build the hardware, load each of the projects in to Kicad, generate Gerber files and upload to a PCB manufacturer such as https://jlcpcb.com/. I can go into more detail about this at a later point.

The to get started, load the MonoSeed09 project on to the Daisy Seed by pressing both buttons to put it into program mode, entering the relevant folder, then enetering the commands to upload the code onto the Seed:

text
cd Examples/MonoSeed09
make clean; make; make program-dfu;

Ensure the Daisy Seed is correctly seated in the breakout board. Then connect the potentiometer array to port 1 with a JST XH2.54 8 wire cable, and connect the MIDI adapter with a JST XH2.54 4 wire cable. Finally connect your MIDI sequencer to the MIDI in DIN connector and plug your headphones into the audio out jack socket. Set the MIDI transmit channel to 1 - this is what it defaults to.

Disclaimer

Although I am a professional programmer, I am purely a hobbyist when it comes to hardware or embedded programming. There may well be some mistakes here and I accept no responsibility for damage to you Daisy Seed, external equipment or anything else. You use this code and harware at your own risk.

Parts

14
QtyValueFootprintReferences
4Conn_01x08_MaleConnector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ8, J11, J12, J13
21502_011502_01:1502_01J3, J4
2Conn_01x04_MaleConnector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_VerticalJ5, J6
2Conn_01x06_MaleConnector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_VerticalJ7, J9
2Conn_01x20_FemaleConnector_PinSocket_2.54mm:PinSocket_1x20_P2.54mm_VerticalJ1, J2
1Barrel_JackConnector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_HorizontalJ10
1Device_Audio_Electrosmith_Daisy_Seed_Rev4Device_Audio_Electrosmith_Daisy_Seed:Device_Audio_Electrosmith_Daisy_SeedA1

More from lucidcoding/daisy-seed-development-kit

3
  • 2 layers78.7 × 53.3 mmExternalCodec, the printed circuit board in 3D

    ExternalCodec

    lucidcoding/daisy-seed-development-kit

    A modular development kit for the Electrosmith Daisy Seed development board. Currently modules include the central breakout board, a MIDI adapter and an array of 16 potentiometers.

    26 parts29
  • 2 layers132.1 × 101.6 mmPotentiometerArray, the printed circuit board in 3D

    PotentiometerArray

    lucidcoding/daisy-seed-development-kit

    A modular development kit for the Electrosmith Daisy Seed development board. Currently modules include the central breakout board, a MIDI adapter and an array of 16 potentiometers.

    19 parts29
  • 2 layers71.1 × 40.6 mmMidi, the printed circuit board in 3D

    Midi

    lucidcoding/daisy-seed-development-kit

    A modular development kit for the Electrosmith Daisy Seed development board. Currently modules include the central breakout board, a MIDI adapter and an array of 16 potentiometers.

    10 parts29

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the BreakoutBoard PCB?

It measures 101.6 × 76.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the BreakoutBoard use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the BreakoutBoard KiCad files?

From the lucidcoding/daisy-seed-development-kit repository on GitHub, at the commit this page was made from: the board is Hardware/BreakoutBoard/PCB/BreakoutBoard/BreakoutBoard.kicad_pcb and its schematic Hardware/BreakoutBoard/PCB/BreakoutBoard/BreakoutBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the BreakoutBoard design in my own project?

Its repository states no licence, so its author keeps all rights: ask lucidcoding before reusing the design.