

Midi tel interface board
The Miditel is a Midi keyboard built with a Mini-tel keyboard. The key layout is inspired by an accordion keyboard.
- Size
- 154 × 40.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 46
- Pads
- 150
- Tracks, vias
- 167, 5
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Jan 2023
- Updated
- 15 Feb 2026
Overview
Midi tel interface board is an open-source printed circuit board by lucblender, from the lucblender/Miditel-keyboard repository on GitHub. It is a 2-layer board of 154 × 40.5 mm with 13 parts on 46 nets, routed with 167 tracks and 5 vias.
It is built around the RK09K1110B26. Its parts include 3 resistors, 3 connectors, 2 diodes, 1 IC and 1 switch. It belongs with the audio and music and interfaces and adapters boards and the RP2040 boards of this library.
Main components
1README
README.mdMIDITEL, a MIDI keyboard using a Minitel keyboard

Description
The Miditel is a Midi keyboard built with a Mini-tel keyboard. The key layout is inspired by an accordion keyboard. Its features are highly inspired by the Arturia Keystep including Normal play, sequencer, or arpeggiator. In addition, it embedded a small Oled screen and give unique a multi-sequencer feature
The project is based on the MINITEL 1.
Hardware
You will need a miditel 1 keyboard with a working keyboard matrix, the PCB which can be found in the hardware/PCB, an 1.3 inch OLED Display module by waveshare
Software
The project run on a raspberry pico 1 with micropython. To this date, it is working under v1.27.0. Download latest micropython image on Micropython website.
You then need to transfer .py files and .pbm (pictures) files on the little fs of the pico. All the .py files, all the .pbm files and the folder arp_mode with all its .pbm files. Here is what the structure should look like.
- arp_mode
- dwn.pbm
- dwnx2.pbm
- ...
- arial6.py
- arial8.py
- arial10.py
- font6.py
- font10.py
- keyboardConfiguration.py
- main.py
- OLED_SPI.py
- writer.py
- lxb64x64.pbm
- pause.pbm
- play.pbm
- rec.pbm
- stop.pbm
About Minitel
Remove the keyboard from your minitel. You will then connect the ribbon cable of the minitel to a serie of wire and then to J3, the 17 pins connector on the PCB. All the info about the minitel keyboard and its matrix can be found on entropie.org
Manufacturing Files
PCB
The PCB to control the miditel files can be found in the hardware/PCB folder. I personnaly used PCBWay service to produce the PCB.
The PCB is as simple double sided PCB.
Front panel
The manufacturing files of the front panel can be found in the hardware/FrontPanel folder. It has been made to cnc machine and laser engrave a front panel. They can also be easily converted to make the front panel of a PCB which is a cheaper option. The Front panel is composed of the following files:
- Top_Platev004 files : the front panel with the cutout
- Top_Plate_design-only : only the "aestetic" part
- Top_Plate_outer_shape : only the "cutout" part
In my original design, the front panel has been made using PCBWay Sheet Metal Fabrication service. I chose bead-blasted copper with custom laser engraving to fit the color of the Minitel Keyboard.
3D printed parts
The manufacturing files of the front panel can be found in the hardware/3DPrinting folder.
- Bottom_Platev004.3mf : bottom plate that hold the PCB and is glued directly on the minitel
- Wheelv004.3mf : wheel to put on the potentiometers
- paint stencil folder : 3d printable stencil to paint white and black square on the key of the minitel
LICENSE
This license enables reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms. CC BY-NC-SA includes the following elements:
BY: credit must be given to the creator. NC: Only noncommercial uses of the work are permitted. SA: Adaptations must be shared under the same terms.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3 |
| 2 | RK09K1110B26 | RK09K1110B26:RK09K1110B26 | VR1, VR2 |
| 1 | Conn_01x07_Male | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | Conn_01x17_Male | Connector_PinHeader_2.54mm:PinHeader_1x17_P2.54mm_Vertical | J3 |
| 1 | DIN-5_180degree | KiCad:52120441 | J1 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV2 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1 |
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Midi tel interface board PCB?
It measures 154 × 40.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Midi tel interface board use?
13 parts, built around the RK09K1110B26. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Midi tel interface board KiCad files?
From the lucblender/Miditel-keyboard repository on GitHub, at the commit this page was made from: the board is hardware/PCB/midi-tel-interface-board/midi-tel-interface-board.kicad_pcb and its schematic hardware/PCB/midi-tel-interface-board/midi-tel-interface-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Midi tel interface board design in my own project?
Its repository states no licence, so its author keeps all rights: ask lucblender before reusing the design.