
PCIexpress x8 low
lucanastasio/PCIexpress-KiCad
PCI express libraries and templates for KiCad

PCI express libraries and templates for KiCad
PCIexpress x16 full is an open-source printed circuit board by lucanastasio, from the lucanastasio/PCIexpress-KiCad repository on GitHub. It is a 4-layer board of 312 × 111.2 mm with 66 parts on 123 nets, routed with 323 tracks and 102 vias.
Its parts include 32 capacitors, 32 resistors and 2 connectors.
PCI Express™ libraries and templates for KiCad Made using guidelines from PCI Express™ Card Electromechanical Specification Rev. 1.2
Updated for KiCad 6

Templates:
Symbols:
Footprints:
This documentation describes Open Hardware and is licensed under the CERN OHL v.1.2.
You may redistribute and modify this documentation under the terms of the CERN OHL v.1.2. (http://ohwr.org/cernohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN OHL v.1.2 for applicable conditions.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +16 |
| 32 | 49.9 | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +16 |
| 1 | PCIexpress_bracket | PCIexpress:PCIexpress_bracket_full | J1 |
| 1 | PCIexpress_x16 | PCIexpress:PCIexpress_x16 | J2 |

lucanastasio/PCIexpress-KiCad
PCI express libraries and templates for KiCad

lucanastasio/PCIexpress-KiCad
PCI express libraries and templates for KiCad
StuckAtPrototype/Racer
These are structured into their own files. I could have used submodules, but decided against it.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

MicroCoreLabs/Projects
Ted Fried's MicroCore Labs Projects - FPGA CPU cores and emulators for the 8088, 8086, 8051, 6502, 68000, Z80, Risc-V, and also Typewriter and EPROM Emulator projects.



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

magkopian/raspberry-pi-compute-module-base-board
Base board for the Raspberry Pi Compute Module

It measures 312 × 111.2 mm and has 4 copper layers, 1.6 mm thick.
66 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lucanastasio/PCIexpress-KiCad repository on GitHub, at the commit this page was made from: the board is PCIexpress_x16_full/PCIexpress_x16_full.kicad_pcb and its schematic PCIexpress_x16_full/PCIexpress_connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lucanastasio before reusing the design.