

NFCMusicPlayer 12
Portable MP3 music player with NFC tags control
- Size
- 90 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 39
- Pads
- 117
- Tracks, vias
- 241, 15
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 16 Feb 2024
- Updated
- 26 Jan 2026
Overview
NFCMusicPlayer 12 is an open-source printed circuit board by lucadentella, from the lucadentella/NFCMusicPlayer repository on GitHub. It is a 2-layer board of 90 × 90 mm with 23 parts on 39 nets, routed with 241 tracks and 15 vias.
Its parts include 5 resistors, 4 connectors, 2 capacitors, 2 ICs and 2 diodes. It belongs with the ESP32 boards of this library.
README
README.mdNFCMusicPlayer

Portable MP3 music player with NFC tags control
Features :trophy:
- SD card reader
- Battery powered with built-in USB-C charger
- Web based configuration (map NFC tags to songs)
- Arduino based firmware
- 3D printed enclosure
:movie_camera: Tutorial
:notebook: Documentation
:wrench: Board
:gift: Enclosure
:floppy_disk: Firmware
Required libraries
- ESP32-audioI2S 2.0.0
- Adafruit_PN532 1.3.4
- Async TCP 3.4.0
- ESP Async WebServer 3.7.7
- ArduinoJson 7.4.1
- Arduino List 3.0.1
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2, R3 |
| 2 | LED | LED_THT:LED_D5.0mm_Horizontal_O1.27mm_Z9.0mm | D1, D2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R5 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 22uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C2 |
| 1 | 27k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R4 |
| 1 | BOOT | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW2 |
| 1 | ESP32-WROOM-E | PCM_Espressif:ESP32-WROOM-32E | U1 |
| 1 | LipoCharger | LD:LipoCharger_Module | M1 |
| 1 | MAX98357 | LD:MAX98357_Module | M3 |
| 1 | MCP1826S | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | NFC | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Power_Button | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | RESET | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
| 1 | SDCard | LD:MicroSD_Module | M4 |
| 1 | SERIAL | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | VOLUME_POT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | ~ | LD:Battery_Holder | B1 |
Similar boards
- 2 layers65 × 56 mm

- 2 layers14 × 100 mm

Yunomi
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
23 parts3kApache-2.0 - 2 layers50.8 × 52.2 mm

- 2 layers138.8 × 89.8 mm

- 2 layers32.9 × 53.3 mm

- 2 layers35.5 × 50 mm

- 2 layers19 × 19 mm

- 2 layers88.5 × 28 mm

ExpBreakout
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
23 parts258
Questions
How big is the NFCMusicPlayer 12 PCB?
It measures 90 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NFCMusicPlayer 12 use?
23 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NFCMusicPlayer 12 KiCad files?
From the lucadentella/NFCMusicPlayer repository on GitHub, at the commit this page was made from: the board is board/NFCMusicPlayer_12.kicad_pcb and its schematic board/NFCMusicPlayer_12.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NFCMusicPlayer 12 design in my own project?
Its repository states no licence, so its author keeps all rights: ask lucadentella before reusing the design.