2 layers116.8 × 30 mm
Type d
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
14 parts3kApache-2.0
2 layers40 × 60 mm
Wildeye pcb
lstranskyTGM/WildEye5- Size
- 40 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 46
- Pads
- 69
- Tracks, vias
- 76, 5
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 18 Apr 2024
- Updated
- 15 Dec 2025
Overview
Wildeye pcb is an open-source printed circuit board by lstranskyTGM, from the lstranskyTGM/WildEye repository on GitHub, published under the MIT licence. It is a 2-layer board of 40 × 60 mm with 14 parts on 46 nets, routed with 76 tracks and 5 vias.
README
README.mdWildEye
WIldEye Wildkamera Diplomprojekt
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | REF1, REF2, REF3, REF4 |
| 3 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | Powerbank_Power1, RaspberryPi_USB1, Switch_Module1 |
| 2 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | BME280_Sensor1, LTE_Modem1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | PIR_Sensor1 |
| 1 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | GY-87_Sensor1 |
| 1 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | RaspberryPi_GPIOs1 |
| 1 | LOGO | LOGO | G*** |
The 13 most common of 14 parts.
Questions
How big is the Wildeye pcb PCB?
It measures 40 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wildeye pcb use?
14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wildeye pcb KiCad files?
From the lstranskyTGM/WildEye repository on GitHub, at the commit this page was made from: the board is wildcam/hardware/pcb/Wildeye_pcb.kicad_pcb and its schematic wildcam/hardware/pcb/Wildeye_pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wildeye pcb design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers32 × 22 mm
- 2 layers34 × 45 mm
2032Charger
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
14 parts915 - 2 layers34 × 109.9 mm
- 2 layers45.3 × 42.7 mm
- 2 layers42.5 × 28.8 mm
C5VRX JACK DIY
Twotoz/C5VRX
Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS
14 parts515GPL-3.0 - 2 layers54 × 47 mm
- 2 layers62 × 24 mm
