

Flarm amp
Flarm_LNA
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 14
- Pads
- 31
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 7 (file 20221018)
- Created
- 18 Oct 2023
- Updated
- 2 Nov 2023
Overview
Flarm amp is an open-source printed circuit board by LorenzoCucchi, from the LorenzoCucchi/Flarm_LNA repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 9 parts on 14 nets.
It is built around the LL4148, B39871B3734H110 and BAV99, with the BC817 among its other parts. Its parts include 4 diodes, 2 ICs and 2 transistors. It belongs with the audio and music boards of this library.
Main components
4LL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching DiodesB39871B3734H110
SMD3030-6P-45℃~+125℃ 3.9dB 50Ω 868.3MHz SMD3030-6P SAW Filters ROHSQualcommSAW FiltersBAV99
SOT-231 Pair Series Connection 1.25V@150mA 100V 215mA 250mW 4A 4ns 500nA@80V SOT-23 Switching Diodes ROHSNexperiaSwitching DiodesBC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | LL4148 | Diode_SMD:D_MiniMELF | D1, D2, D5 |
| 1 | B39871B3734H110 | Filter:Filter_1109-5_1.1x0.9mm | FL1 |
| 1 | BAV99 | Package_TO_SOT_SMD:SOT-23 | D9 |
| 1 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | IRLML2060 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | LM78L05_SO8 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | PGA-105 | Package_TO_SOT_SMD:SOT-89-3 | U1 |
Similar boards
- 2 layers70 × 100 mm

- 2 layers90 × 144.6 mm

- 2 layers

- 2 layers149.9 × 55.9 mm

- 6 layers100 × 50 mm

Archive
sikaxn/FRC-Custom-CAN-Sensor
If you are looking for IronMaple ESP32‐FRC‐devkit resources, please switch branch to dev-board.
92 parts12GPL-3.0 - 4 layers80 × 80 mm

- 2 layers85 × 40 mm

- 2 layers100 × 100 mm

Questions
What parts does the Flarm amp use?
9 parts, built around the LL4148, B39871B3734H110, BAV99 and BC817. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flarm amp KiCad files?
From the LorenzoCucchi/Flarm_LNA repository on GitHub, at the commit this page was made from: the board is LNA_AMP/flarm_amp/flarm_amp.kicad_pcb and its schematic LNA_AMP/flarm_amp/flarm_amp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flarm amp design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).