Skip to the content
2 layers43.5 × 43 mmLed controller esp32, the printed circuit board in 3D

Led controller esp32

longrackslabs/kicad-projects

Motion-activated nightlight built into a Nest Protect housing. ESP32 firmware, custom PCB, 3D printed enclosure and diffuser.

Size
43.5 × 43 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
16
Pads
33
Tracks, vias
1, 0
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 Sep 2025
Updated
3 Oct 2026

Overview

Led controller esp32 is an open-source printed circuit board by longrackslabs, from the longrackslabs/kicad-projects repository on GitHub. It is a 2-layer board of 43.5 × 43 mm with 9 parts on 16 nets, routed with 1 track and 0 vias.

Its parts include 4 capacitors, 2 ICs, 2 connectors and 1 resistor. It belongs with the ESP32 and RISC-V boards of this library.

README

projects/motion-nightlight/README.md

Motion Nightlight

Motion-activated nightlight built into a Nest Protect housing. ESP32 firmware, custom PCB, 3D printed enclosure and diffuser.

Related files

WhatWhere
Design artifacts (DIYLC, FreeCAD, STLs, docs)Dropbox/Projects/Nest DIY Nightlight/
Firmware~/src/platformio-projects/nest_night_light

TODO

PCB Changes

  • Remote LDR — 2-pin JST header instead of THT so it can be positioned anywhere
  • Right-angle JST on J1 and LED1
  • Populate all MPNs in KiCad — needed for AI design review to catch pinout issues
  • Fix C3 symbol — non-polarized ceramic
  • Fix U2 lib_id — 74HC08 not 74LS08
  • Add 47-100Ω resistor between U1 pin 10 and D1 anode
  • Add Rev B silkscreen marking
  • Fix RV1/RV2 3D model absolute paths

Power

  • Build single supply pigtail — splits one 5V to both V_LED+ and V_CONTROL on J1

Enclosure

  • Custom enclosure in FreeCAD — proper LED and LDR positioning
  • Custom diffuser — Nest lens doesn't align with custom LED positions
  • Access holes for RV1/RV2 trim pot adjustment

Assembly

  • First hot air reflow attempt with SAG-55 and Chipquik paste
  • Build second board using incremental gate plan

Stretch

  • Replace discrete logic with ATtiny for more flexibility
  • PWM dimming on Q2
  • Battery level indicator

Parts

9
QtyValueFootprintReferences
20.1uFCapacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mmC2, C4
21000uF 16VCapacitor_THT:CP_Radial_D8.0mm_P3.50mmC1, C3
1330ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1DC Buck 5VLongracks:DC_Buck_17x11mmU2
1LEDTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_HorizontalJ2
1Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_HorizontalJ1
1XIAO ESP32C3Longracks:Xiao_Socket_2x7U1

More from longrackslabs/kicad-projects

2
  • 2 layers47 × 29 mmMotion nightlight, the printed circuit board in 3D

    Motion nightlight

    longrackslabs/kicad-projects

    Motion-activated nightlight built into a Nest Protect housing. ESP32 firmware, custom PCB, 3D printed enclosure and diffuser.

    24 parts
  • 2 layers27.8 × 11.8 mmMotionhold AM312, the printed circuit board in 3D

    Motionhold AM312

    longrackslabs/kicad-projects

    Motion-activated nightlight built into a Nest Protect housing. ESP32 firmware, custom PCB, 3D printed enclosure and diffuser.

    7 parts

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the Led controller esp32 PCB?

It measures 43.5 × 43 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Led controller esp32 use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Led controller esp32 KiCad files?

From the longrackslabs/kicad-projects repository on GitHub, at the commit this page was made from: the board is projects/led-controller-esp32/led-controller-esp32.kicad_pcb and its schematic projects/led-controller-esp32/led-controller-esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Led controller esp32 design in my own project?

Its repository states no licence, so its author keeps all rights: ask longrackslabs before reusing the design.