
OEM ECU
aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware

Radio controlled car
Vmu is an open-source printed circuit board by lonezor, from the lonezor/rc_car repository on GitHub, published under the GPL-2.0 licence. It is a 2-layer board of 152.4 × 147.3 mm with 21 parts on 42 nets, routed with 297 tracks and 60 vias.
It is built around the ADS1115. Its parts include 8 resistors, 4 capacitors, 3 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6, R8 |
| 4 | 100n | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C2, C3, C4 |
| 4 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5, R7 |
| 2 | Screw_Terminal_01x12 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-12_1x12_P5.00mm_Horizontal | J1, J2 |
| 1 | ADS1115 | Module:Adafruit_ADS1115 | U2 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano_WithMountingHoles | A1 |
| 1 | Screw_Terminal_01x08 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-8_1x08_P5.00mm_Horizontal | J3 |
The 17 most common of 21 parts.

aeonSolutions/AeonLabs-AI-Volvo-MKII-Open-Hardware
Volvo MKII Open Hardware


rin67630/Drok-Juntek-on-steroids
Extend the possibilities of cheap digital power supplies with a WiFi module

sdylewski/Analog-Redial
A circuit board for old telephones to come back to life. Plug one or two phones in, and you can call the other phone, use bluetooth, connect to others via voip, and do a variety of other things with a plain old rotary…


ToneAlchemy/BiasPro
A professional-grade, dual-probe Arduino Bias Meter for guitar tube amplifiers. Open source hardware & firmware

mikelawrence/esphome-indoor-multi-sensor-hardware
ESPHome Indoor Multi-Sensor hardware. This design supports Radar/PIR Presence, Temperature, Humidity, Pressure, Light, CO2, CO, VOC, NOX and PM sensors.

It measures 152.4 × 147.3 mm and has 2 copper layers, 1.6 mm thick.
21 parts, built around the ADS1115. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lonezor/rc_car repository on GitHub, at the commit this page was made from: the board is PCB/VMU/vmu.kicad_pcb and its schematic PCB/VMU/vmu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).