2 layers65 × 56 mm
2 layers65 × 36 mm
Ecg ads1292 main
lokasho/lifesensor-hardware2- Size
- 65 × 36 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 62
- Pads
- 175
- Tracks, vias
- 294, 83
- Pours
- 50
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Mar 2020
- Updated
- 11 Dec 2020
Overview
Ecg ads1292 main is an open-source printed circuit board by lokasho, from the lokasho/lifesensor-hardware repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 65 × 36 mm with 52 parts on 62 nets, routed with 294 tracks and 83 vias.
It is built around the ADS1292IPBSR and MMZ2012R102AT000. Its parts include 21 capacitors, 20 resistors, 2 ICs, 2 connectors and 1 inductor.
Main components
2
ADS1292IPBSR
TQFP-32(5x5)-40℃~+85℃ 107dB 2 2.42V、4.033V 2.7V~5.25V 20uA 24 512kHz Programmable gain、Multiplexers、Internal reference source、Fault detection SPI TQFP-32(5x5) Analog Front End (AFE) ROHSTexas InstrumentsAnalog Front End (AFE)
MMZ2012R102AT000
0805-55℃~+125℃ 1 1kΩ@100MHz 300mΩ 500mA ±25% 0805 Ferrite Beads ROHSTDKFerrite Beads
README
README.mdlifesensor-hardware
Temporary repository for the next hardware generation of the CADUS Life Sensor. Official repository at https://github.com/cadus/Life-Sensor.
Similar projects and Resources:
-
ecg
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R4, R6, R15, R16 |
| 4 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R7, R8, R13, R17 |
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C5, C17, C18, C20 |
| 4 | n.p. | MountingHole:MountingHole_2.7mm_M2.5 | MK1, MK2, MK3, MK4 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C14, C16, C21 |
| 3 | 22k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R9, R10, R11 |
| 3 | 3n 50V | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3 |
| 3 | 6.8k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R14, R18, R19 |
| 3 | n.p. | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C6, C7, C12 |
| 3 | n.p. | Resistor_SMD:R_0815_2038Metric_Pad1.53x4.00mm_HandSolder | R1, R2, R3 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C4, C9 |
| 2 | 4.7n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C10, C11 |
| 2 | 470p 50V | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C13, C15 |
| 2 | n.p. | TestPoint:TestPoint_Loop_D2.50mm_Drill1.0mm | TP5, TP15 |
| 2 | n.p. | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R20 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C8 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C19 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12 |
| 1 | ADS1292IPBSR | Package_QFP:LQFP-32_5x5mm_P0.5mm | IC1 |
| 1 | Conn_02x04_Odd_Even | Connector_IDC:IDC-Header_2x04_P2.54mm_Horizontal | J1 |
| 1 | Conn_02x20_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | P1 |
| 1 | MMZ2012R102AT000 | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 1 | TPS73033DBVT | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U1 |
More from lokasho/lifesensor-hardware
2- 2 layers65 × 56 mm
Similar boards
- 4 layers85 × 56 mm
- 2 layers60 × 100 mm
- 2 layers30.2 × 26.6 mm
- 4 layers61 × 42 mm
- 2 layers136 × 34.6 mm
KiCad v1
YYK2007/neuroar
EEG-driven AR glasses prototype with custom wearable hardware, firmware, dashboard, and Poke MCP bridge.
56 parts - 2 layers41.4 × 47.5 mm
U2f zero panel
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
52 parts2.4k - 2 layers136 × 130 mm
Lora nodemcu
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
52 parts1.1k - 2 layers69 × 53.8 mm
TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
52 parts530
Questions
How big is the Ecg ads1292 main PCB?
It measures 65 × 36 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ecg ads1292 main use?
52 parts, built around the ADS1292IPBSR and MMZ2012R102AT000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ecg ads1292 main KiCad files?
From the lokasho/lifesensor-hardware repository on GitHub, at the commit this page was made from: the board is components/ecg_ads1292/pcbs/ecg_ads1292_main/kicad/ecg_ads1292_main.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ecg ads1292 main design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).