Skip to the content
2 layers75.2 × 75.2 mmModule1, the printed circuit board in 3D

QBF keyboard — handwired macropad design, firmware diagnostics and wiring tooling

Size
75.2 × 75.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
23
Pads
110
Tracks, vias
0, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
19 Oct 2026
Updated
27 Oct 2026

Overview

Module1 is an open-source printed circuit board by logaan, from the logaan/qbf-keyboard repository on GitHub. It is a 2-layer board of 75.2 × 75.2 mm with 21 parts on 23 nets.

It belongs with the keyboards and input boards of this library.

Parts

21
QtyValueFootprintReferences
12switch_choc_v1_v2S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12
4mounting_hole_npthMH1, MH2, MH3, MH4
1battery_connector_jst_ph_2JST1
1reset_switch_smd_sideRST1
1display_nice_viewDISP1
1mcu_nice_nanoMCU1
1power_switch_smd_sidePWR1

More from logaan/qbf-keyboard

6
  • 4 layers75.2 × 75.2 mmModule1b, the printed circuit board in 3D

    Module1b

    logaan/qbf-keyboard

    QBF keyboard — handwired macropad design, firmware diagnostics and wiring tooling

    83 parts
  • 2 layers98 × 80 mmMacropad, the printed circuit board in 3D

    Macropad

    logaan/qbf-keyboard

    QBF keyboard — handwired macropad design, firmware diagnostics and wiring tooling

    23 parts
  • 2 layers98 × 96 mmMacropad, the printed circuit board in 3D

    Macropad

    logaan/qbf-keyboard

    QBF keyboard — handwired macropad design, firmware diagnostics and wiring tooling

    23 parts
  • 2 layers97.7 × 58.5 mmMacropad, the printed circuit board in 3D

    Macropad

    logaan/qbf-keyboard

    QBF keyboard — handwired macropad design, firmware diagnostics and wiring tooling

    20 parts
  • 2 layers75.2 × 75.2 mmModule3, the printed circuit board in 3D

    Module3

    logaan/qbf-keyboard

    QBF keyboard — handwired macropad design, firmware diagnostics and wiring tooling

    18 parts
  • 2 layers75.2 × 75.2 mmModule2, the printed circuit board in 3D

    Module2

    logaan/qbf-keyboard

    QBF keyboard — handwired macropad design, firmware diagnostics and wiring tooling

    15 parts

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the Module1 PCB?

It measures 75.2 × 75.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Module1 use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Module1 KiCad files?

From the logaan/qbf-keyboard repository on GitHub, at the commit this page was made from: the board is boards/modules/generated/module1/ergogen/pcbs/module1.kicad_pcb and its schematic boards/module1b/source/module1b.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Module1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask logaan before reusing the design.