2 layers34.8 × 65.9 mm
2 layers33.8 × 65.9 mm
E book
LizOnAir/E-bookA e-ink display that allows me to read my book at anytime and anywhere.
- Size
- 33.8 × 65.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 97
- Nets
- 91
- Pads
- 337
- Tracks, vias
- 892, 326
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 18 May 2026
- Updated
- 20 May 2026
Overview
E book is an open-source printed circuit board by LizOnAir, from the LizOnAir/E-book repository on GitHub. It is a 2-layer board of 33.8 × 65.9 mm with 97 parts on 91 nets, routed with 892 tracks and 326 vias.
It is built around the ESP32-S3, W25Q128JVSIQ and AMS1117-3.3, with the SS14, AFC07-S24FCC-00 and AO3400A among its other parts. Its parts include 41 capacitors, 27 resistors, 6 diodes, 5 connectors and 4 ICs. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
7
ESP32-S3
QFN-56-EP(7x7)-40℃~+105℃ -98.4dBm 150Mbps 2.412GHz~2.484GHz 2.4GHz 21dBm 340mA 3V~3.6V 88mA SPI、USB、UART、ADC、I2C、I2S、PWM WiFi transceiver QFN-56-EP(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICs
W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
SS14
SMA(DO-214AC)-55℃~+150℃ 1A 25A 300uA@40V 40V 550mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
AFC07-S24FCC-00
SMD,P=0.5mm,卧贴-25℃~+85℃ 0.3mm 0.5mm 24P 2mm 400mA 50V Bottom Contact Phosphor bronze Slide Lock Surface Mount, Right Angle Tin SMD,P=0.5mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSJSFFC, FPC (Flat Flexible) Connector Assemblies
AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdE-ink Devboard
This devboard is made to be a e-book that can connect to E-ink display, which make reading more easier and accessible.
Features:
- low power consume rate
- read offline
- download books online
- no bluelight (YOU CAN READ BEFORE BED)
CAD Model:
Made in Fusion360.Liz Access files in CAD folder.
PCB
Here's my PCB! It was made in KiCad.
Schematic
Main board
E-ink Display
PCB
Access files in PCB folder.
Firmware
I used Arduino IDE Mode:
- download books
- add bookmark
- read
Access files in Firmware folder.
BOM:
Here should be everything you need to make this:
- 1x PCBA
- 1x 3.7V Lipo Battery 500mAh
- 1x Tactile buttons
- 1x 7.5 inch E-ink display
- 4x M3 14mm Screws
- 4x M3 OD4.2 L 4 Heatset inserts
- 1x 3d printed case
Parts
97| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C6, C7, C8, C16, C17, C20, C25, C36 |
| 8 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C10, C11, C15, C18, C19, C22, C32, C35 |
| 8 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C48, C49, C50, C51, C52, C53, C54, C55 |
| 6 | 0R | Resistor_SMD:R_0402_1005Metric | R23, R26, R27, R28, R29, R30 |
| 6 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R4, R21, R22, R33, R35 |
| 4 | 12pF | Capacitor_SMD:C_0402_1005Metric | C4, C33, C37, C38 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C29, C30, C34, C41 |
| 4 | SS14 | Diode_SMD:D_SMA | D4, D5, D6, D7 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C13, C26, C39 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C31, DNP1 |
| 2 | 1R | Resistor_SMD:R_0603_1608Metric | R36, R38 |
| 2 | 2.2R | Resistor_SMD:R_0603_1608Metric | R34, R37 |
| 2 | 200K | Resistor_SMD:R_0402_1005Metric | R12, R19 |
| 2 | 33R | Resistor_SMD:R_0402_1005Metric | R2, R18 |
| 2 | 470R | Resistor_SMD:R_0402_1005Metric | R24, R25 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R14, R17 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D1, D3 |
| 1 | +3V3 | TestPoint:TestPoint_Pad_D1.0mm | +3V3 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C40 |
| 1 | 10uH | Inductor_SMD:L_Ferrocore_DLG-0403 | L4 |
| 1 | 2K | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 2nH | Inductor_SMD:L_0402_1005Metric | L3 |
| 1 | 32.768 kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 4.7nH | Inductor_SMD:L_0402_1005Metric | L6 |
| 1 | 40MHz(10ppm) | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y2 |
| 1 | AFC07-S24FCC-00 | Connector_FFC-FPC:Jushuo_AFC07-S24FCA-00_1x24-1MP_P0.50_Horizontal | P4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Antenna | RF_Antenna:Texas_SWRA117D_2.4GHz_Left | AE1 |
| 1 | BTN | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | BTN1 |
| 1 | Conn_01x02_Pin | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_1.00mm:PinHeader_1x06_P1.00mm_Vertical | J5 |
| 1 | Conn_01x12_Pin | Connector_PinHeader_1.00mm:PinHeader_1x12_P1.00mm_Vertical | J6 |
| 1 | DNP | Inductor_SMD:L_0402_1005Metric | L5 |
| 1 | DNP | Capacitor_SMD:C_0402_1005Metric | C14 |
| 1 | DNP | Resistor_SMD:R_0402_1005Metric | R31 |
| 1 | ESP32-S3 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm | U1 |
| 1 | Flash | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | Flash1 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Reset | Button_Switch_SMD:SW_Push_1P1T_XKB_TS-1187A | Reset1 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
Questions
How big is the E book PCB?
It measures 33.8 × 65.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the E book use?
97 parts, built around the ESP32-S3, W25Q128JVSIQ, AMS1117-3.3 and SS14. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the E book KiCad files?
From the LizOnAir/E-book repository on GitHub, at the commit this page was made from: the board is PCB/hardware.kicad_pcb and its schematic PCB/hardware.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the E book design in my own project?
Its repository states no licence, so its author keeps all rights: ask LizOnAir before reusing the design.
Similar boards
- 4 layers90 × 17 mm
SpecVue
Rujul-Rumale/SpecVue
4-layer ESP32-S3 smart-glasses PCB with camera live streaming and on-device object classification over Wi-Fi.
76 partsCERN-OHL-P-2.0 - 2 layers36 × 68.9 mm
- 4 layers68.6 × 53.3 mm
- 4 layers62 × 46.9 mm
4LayerLabProject
ZharbolatDinmukhamed/Haptic-Glove-PCB
A wrist-mounted PCB for a haptic feedback glove, developed as part of my Research Assistantship at the Tactile Laboratory, Nazarbayev University.
122 parts - 2 layers64 × 39.5 mm
Control
Jochen0x90h/LedControl
Controller for LED strips based on WS2812 with display based on SSD1306
67 partsMIT - 4 layers28 × 70 mm
- 2 layers150 × 100 mm
SmartCube
kokhaie/Smart-Refrigerator-Demo
The KiCad-generated BOM is mirrored into the documentation site under docs/ so it can be published through GitHub Pages.
91 parts