2 layers50 × 50 mm
PolyPot
msplr/PolyPot
Main repository of the PolyPot semester project - yet another IoT device
42 parts1
2 layers32 × 19 mm
ActuKit
LiuToki/pcb-labA collection of experimental boards.
- Size
- 32 × 19 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 8
- Nets
- 8
- Pads
- 29
- Tracks, vias
- 62, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Dec 2024
- Updated
- 22 Dec 2024
Overview
ActuKit is an open-source printed circuit board by LiuToki, from the LiuToki/pcb-lab repository on GitHub, published under the MIT licence. It is a 2-layer board of 32 × 19 mm with 8 parts on 8 nets, routed with 62 tracks and 0 vias.
It is built around the BD6211F-E2 and 2SC1815. Its parts include 3 resistors, 2 ICs, 2 connectors and 1 transistor.
Main components
2
BD6211F-E2
SOP-8-40℃~+85℃ 0uA 1 1A 1Ω 3V~5.5V Interleaved conduction protection、Current sensing/regulation function SOP-8 Brushed DC Motor Drivers ROHSROHM SemiconductorBrushed DC Motor Drivers
2SC1815
SOT-23-55℃~+150℃ 1 NPN 100nA 130 150mA 200mW 250mV 50V 5V 80MHz NPN SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
Parts
8| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 20k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1, J2 |
| 1 | 2SC1815 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | BD6211 | Package_SO:SOP-8_5.28x5.23mm_P1.27mm | U2 |
| 1 | LD14-002 | LT_Vibration_Actuator:LD14-002 | U1 |
Questions
How big is the ActuKit PCB?
It measures 32 × 19 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ActuKit use?
8 parts, built around the BD6211F-E2 and 2SC1815. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ActuKit KiCad files?
From the LiuToki/pcb-lab repository on GitHub, at the commit this page was made from: the board is ActuKit/ActuKit.kicad_pcb and its schematic ActuKit/ActuKit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ActuKit design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers29.5 × 21.6 mm
RC Hotwheels
404boboo/RC-Hotwheels
This repository contains all the files and documentation for our DIY remote-controlled Hot Wheels car. We designed our own custom PCB using KiCad, featuring a NRF24L01 transceiver(We only used it as a receiver for now)…
16 parts - 2 layers28.3 × 75.1 mm
- 2 layers225 × 52 mm
- 2 layers42.5 × 76 mm
- 2 layers357.8 × 124.5 mm
Vic2020mainboard
danwerner21/vic2020
A Vic-20 clone created with [almost] all readily available parts
142 parts78 - 2 layers110 × 48 mm
Jack pedal
GuitarML/GuitarPedalPCBs
Collection of KiCad circuit board designs for guitar pedals you can build yourself.
86 parts62MIT - 2 layers310 × 229.8 mm
