Skip to the content
2 layers88.9 × 47.6 mm8BitGen, the printed circuit board in 3D
Size
88.9 × 47.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
12
Nets
41
Pads
99
Tracks, vias
141, 2
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
25 Sep 2019
Updated
18 May 2021

Overview

8BitGen is an open-source printed circuit board by liu2g, from the liu2g/opl2-chiptune repository on GitHub, published under the MIT licence. It is a 2-layer board of 88.9 × 47.6 mm with 12 parts on 41 nets, routed with 141 tracks and 2 vias.

It is built around the LM358, 74HC595 and SN7404N. Its parts include 5 ICs, 3 capacitors, 3 connectors and 1 crystal.

Main components

3

README

README.md

OPL2 Chiptune

Software and hardware solution to emulate the Chiptune music generation used by OPL chip in Commondore 64. Project detail see my blog post.

License

This project is licensed under MIT License.

Parts

12
QtyValueFootprintReferences
210uCapacitor_THT:CP_Radial_Tantal_D5.0mm_P5.00mmC2, C3
10.1uCapacitor_THT:CP_Radial_Tantal_D5.0mm_P5.00mmC1
174HC595Package_DIP:DIP-16_W7.62mmU1
1Input HeaderConnector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_VerticalJ1
1LM358Package_DIP:DIP-8_W7.62mmU3
1SG-531Oscillator:Oscillator_SeikoEpson_SG-8002DCX1
1SN7404NPackage_DIP:DIP-14_W7.62mmU2
1TRSConnector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_HorizontalJ3
1Thru Hole PadsConnector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ2
1YM3014BPackage_DIP:DIP-8_W7.62mmU5
1YM3812Package_DIP:DIP-24_W15.24mmU4

Similar boards

  • 2 layers177.8 × 200.9 mmIO Interface Card, the printed circuit board in 3D

    IO Interface Card

    Caler1n/TI980A-KICAD

    A Reproductions of the TI980A Schematics in KiCad

    107 parts
  • 2 layers149.9 × 99.5 mmMegafrank, the printed circuit board in 3D

    Megafrank

    rh1tech/frank

    RP2350 Based Hardware Emulation Platform

    262 parts66GPL-3.0
  • 4 layers99.5 × 99.5 mmTurbofrank m1p2, the printed circuit board in 3D

    Turbofrank m1p2

    rh1tech/frank-archive

    Archive of FRANK Boards

    224 parts3
  • 2 layers90 × 55 mmPowerBox, the printed circuit board in 3D

    PowerBox

    frep/kicad

    workspace for kicad projects

    112 parts2
  • 2 layers127 × 117.5 mmDiy ert, the printed circuit board in 3D

    Diy ert

    CainPatel/diy-ert

    A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.

    44 parts1MIT
  • 2 layers72.4 × 48.3 mmTml, the printed circuit board in 3D

    Tml

    0x007E/tml

    Temperature Logger

    117 parts
  • 2 layers192.3 × 116.4 mmDrv E F, the printed circuit board in 3D

    Drv E F

    PabloSGomez50/implante-coclear-estimulador

    111 parts

Questions

How big is the 8BitGen PCB?

It measures 88.9 × 47.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the 8BitGen use?

12 parts, built around the LM358, 74HC595 and SN7404N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 8BitGen KiCad files?

From the liu2g/opl2-chiptune repository on GitHub, at the commit this page was made from: the board is 8BitGen/8BitGen.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the 8BitGen design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).