

8BitGen
- Size
- 88.9 × 47.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 41
- Pads
- 99
- Tracks, vias
- 141, 2
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Sep 2019
- Updated
- 18 May 2021
Overview
8BitGen is an open-source printed circuit board by liu2g, from the liu2g/opl2-chiptune repository on GitHub, published under the MIT licence. It is a 2-layer board of 88.9 × 47.6 mm with 12 parts on 41 nets, routed with 141 tracks and 2 vias.
It is built around the LM358, 74HC595 and SN7404N. Its parts include 5 ICs, 3 capacitors, 3 connectors and 1 crystal.
Main components
3LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational Amplifier74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift RegistersSN7404N
PDIP-140℃~+70℃ 16mA 2.4V 22ns@5V,15pF 2V 4.75V~5.25V 400mV 400uA 800mV PDIP-14 Inverters ROHSTexas InstrumentsInverters
README
README.mdOPL2 Chiptune
Software and hardware solution to emulate the Chiptune music generation used by OPL chip in Commondore 64. Project detail see my blog post.
License
This project is licensed under MIT License.
Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10u | Capacitor_THT:CP_Radial_Tantal_D5.0mm_P5.00mm | C2, C3 |
| 1 | 0.1u | Capacitor_THT:CP_Radial_Tantal_D5.0mm_P5.00mm | C1 |
| 1 | 74HC595 | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | Input Header | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm | U3 |
| 1 | SG-531 | Oscillator:Oscillator_SeikoEpson_SG-8002DC | X1 |
| 1 | SN7404N | Package_DIP:DIP-14_W7.62mm | U2 |
| 1 | TRS | Connector_Audio:Jack_3.5mm_CUI_SJ1-3533NG_Horizontal | J3 |
| 1 | Thru Hole Pads | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J2 |
| 1 | YM3014B | Package_DIP:DIP-8_W7.62mm | U5 |
| 1 | YM3812 | Package_DIP:DIP-24_W15.24mm | U4 |
Similar boards
- 2 layers177.8 × 200.9 mm

- 2 layers149.9 × 99.5 mm

- 2 layers100 × 100 mm

- 4 layers99.5 × 99.5 mm

- 2 layers90 × 55 mm

- 2 layers127 × 117.5 mm

Diy ert
CainPatel/diy-ert
A $150 four-electrode earth resistivity meter (Wenner array): Arduino, AD620, ADS1115. Documented failure-first as an engineering log.
44 parts1MIT - 2 layers72.4 × 48.3 mm

- 2 layers192.3 × 116.4 mm

Questions
How big is the 8BitGen PCB?
It measures 88.9 × 47.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the 8BitGen use?
12 parts, built around the LM358, 74HC595 and SN7404N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 8BitGen KiCad files?
From the liu2g/opl2-chiptune repository on GitHub, at the commit this page was made from: the board is 8BitGen/8BitGen.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the 8BitGen design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).