

Data
Hand made 8bitCPU
- Size
- 200 × 200 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 161
- Nets
- 222
- Pads
- 752
- Tracks, vias
- 2,833, 129
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 12 Nov 2023
- Updated
- 2 Dec 2023
Overview
Data is an open-source printed circuit board by Liu-Yuzh, from the Liu-Yuzh/PEC-1 repository on GitHub. It is a 2-layer board of 200 × 200 mm with 161 parts on 222 nets, routed with 2,833 tracks and 129 vias.
It is built around the CD74HC151E, CD74HC161E and CD74HC08E, with the CD74HC14E among its other parts. Its parts include 54 resistors, 48 diodes, 26 capacitors, 26 ICs and 2 connectors.
Main components
4CD74HC151E
PDIP-16-55℃~+125℃ 29ns@6V,50pF 2V~6V 5.2mA 5.2mA 74HC 8uA Reverse function Single Supply PDIP-16 Signal Switches, Multiplexers, Decoders ROHSTexas InstrumentsSignal Switches, Multiplexers, DecodersCD74HC161E
PDIP-16-55℃~+125℃ 1 24MHz 2V~6V Asynchronous Divide-by-2 Falling Edge PDIP-16 Counters, Dividers ROHSTexas InstrumentsCounters, DividersCD74HC08E
PDIP-14-55℃~+125℃ 1.5V~4.2V 1.9V、3.7V、5.2V 15ns@6V,50pF 2 2V~6V 2uA 4 400mV 5.2mA 5.2mA 500mV~1.8V 74HC Series AND Gate PDIP-14 Logic Gates ROHSTexas InstrumentsLogic GatesCD74HC14E
PDIP-14-55℃~+125℃ 1.5V~4.2V 23ns@6V,50pF 2V~6V 2uA 300mV~1.2V 5.2mA 5.2mA 6 74HC Noise suppression function Push-pull Schmitt trigger PDIP-14 Inverters ROHSTexas InstrumentsInverters
README
README.mdPEC-1
Hand made 8bitCPU, Prototype Experimental Computer No.1
Picture
動いている様子.下記のSample Codeを動かしています.
CPU Architecture
Command List
PEC-1で使用可能なコマンド一覧です.
GRx,GRyは汎用レジスタです.ImはImmidiate Data,すなわち即値データです.
Machine Code
コマンドのマシン語対応表です.
xxやyyは,コマンドで指定したいレジスタ番号の二進数表示です.00(0)~11(3)番まで行けます.
[imdt]は即値データです.データ長は6bitです.
基本的に,オペコード部で各部の制御を行っています.なので, ジャンプ命令などは仕様上レジスタの指定は冗長と扱うためオペランドはどう書いても問題ありません. また,即値が「000000」となっているコマンドも,即値の入力は冗長です,
Sample Code
サンプルコードです.掛け算と引き算を行うプログラムです.
Parts
161| Qty | Value | Footprint | References |
|---|---|---|---|
| 54 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +38 |
| 48 | LED | LED_THT:LED_D3.0mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +32 |
| 26 | 0.1μ | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +10 |
| 12 | CD74HC151 | Package_DIP:DIP-16_W7.62mm_Socket | U13, U14, U15, U16, U17, U18, U19, U20, U21, U22, U23, U24 |
| 12 | CD74HC161 | Package_DIP:DIP-16_W7.62mm_Socket | U1, U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | Conn_01x34_Pin | Connector_PinHeader_2.54mm:PinHeader_2x17_P2.54mm_Horizontal | J1, J2 |
| 1 | CD74HC08 | Package_DIP:DIP-14_W7.62mm_Socket | U25 |
| 1 | CD74HC14 | Package_DIP:DIP-14_W7.62mm_Socket | U26 |
| 1 | SW_DIP_x06 | Package_DIP:DIP-12_W7.62mm_Socket | SW1 |
More from Liu-Yuzh/PEC-1
5- 2 layers200 × 200 mm

- 2 layers200 × 200 mm

- 2 layers200 × 200 mm

- 2 layers200 × 200 mm

- 2 layers200 × 200 mm

Similar boards
- 6 layers313 × 259.5 mm

Open8-vga motherboard
adham404/Open8-VGA
An 8-bit computer from 74HC logic: microcoded CPU, VGA, PS/2, on-board editor and assembler. Play it in your browser.
322 parts3MIT - 2 layers101.6 × 152.4 mm

- 2 layers80 × 75 mm

- 2 layers

Alarm clock pcb
BlakeWooley/alarm_clock_pcb
KiCAD schematics and other documents for a custom alarm clock PCB that I designed without any microcontroller.
12 parts - 2 layers117.5 × 99.7 mm

- 4 layers205.5 × 152 mm

- 2 layers245 × 127 mm

- 2 layers68.6 × 53.3 mm

SensorArduinoHat
shareresearchteam/SAMI-Robot
Software and Hardware resources and development of the SAMI humanoid robot
36 parts5MIT
Questions
How big is the Data PCB?
It measures 200 × 200 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Data use?
161 parts, built around the CD74HC151E, CD74HC161E, CD74HC08E and CD74HC14E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Data KiCad files?
From the Liu-Yuzh/PEC-1 repository on GitHub, at the commit this page was made from: the board is kicad/data/data.kicad_pcb and its schematic kicad/ALU/ALU.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Data design in my own project?
Its repository states no licence, so its author keeps all rights: ask Liu-Yuzh before reusing the design.