Skip to the content
4 layers70 × 95 mmDevboard v1, the printed circuit board in 3D

Schematics etc.

Size
70 × 95 mm
Copper layers
4
Thickness
1.6 mm
Parts
42
Nets
142
Pads
373
Tracks, vias
1,228, 224
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
8 Dec 2023
Updated
2 Nov 2026

Overview

Devboard v1 is an open-source printed circuit board by LiU-SeeGoals, from the LiU-SeeGoals/Electronics repository on GitHub. It is a 4-layer board of 70 × 95 mm with 42 parts on 142 nets, routed with 1,228 tracks and 224 vias.

It is built around the ST1L05CPU33R. Its parts include 31 capacitors, 3 resistors, 3 connectors, 2 ICs and 1 diode. It belongs with the microcontroller boards boards and the STM32 boards of this library.

Main components

1

README

README.md

Electronics

Schematics etc.

Motor driver

The motor driver has 5 important pins,

Motor driver has 5 pins to the devboard, 2 power pins and 8 pins to the motor

The important pins are

text
PWM, - Takes PWM signal to decide speed of motor, generate from devboard with timers.

FGOUT, - Hall sensor tick output, work like a wheel encoder and ticking as the motor spins so that we know how much the motor has spun.

nFault, - Gives fault messages when fault states are entered by going low. Currently does not work, set this pin HIGH 5v or motor driver can enter test mode.

brake - HIGH sets all motor coils high breaking the motor hard.

dir - Decides direction for motor

Motor driver improvements

Capacitors and components change capacitance, inductance, etc as the voltage changes. This was not know during the making of driver.

Capacitors should be closer to the pins they are filtering.

There is a risk of overheating if the motors get stuck for a longer time, adding some cooling would be nice.

Getting started

Add the .pretty library file to get footprints from lib/

Using kicad: preferences -> Manage footprint libraries

Parts

42
QtyValueFootprintReferences
19100nFCapacitor_SMD:C_0402_1005MetricC2, C3, C4, C5, C6, C12, C13, C14, C15, C17, C18, C19, C20, C21, C22, C23 +3
64.7uFCapacitor_SMD:C_0402_1005MetricC1, C10, C16, C27, C30, C31
32.2uFCapacitor_SMD:C_0402_1005MetricC24, C25, C26
210uFCapacitor_SMD:C_0402_1005MetricC28, C29
2Conn_02x36_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x35_P2.54mm_VerticalCN11, CN12
1100kResistor_SMD:R_0402_1005MetricR3
110kResistor_SMD:R_0402_1005MetricR2
11uFCapacitor_SMD:C_0402_1005MetricC11
162Resistor_SMD:R_0402_1005MetricR1
1CK_KMS2xxGLibrary:TPS645-5NC105_JLCPCBSW1
1Conn_01x08Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_VerticalJ1
1LEDLED_SMD:LED_0603_1608MetricD1
1LOGOLOGOG***
1ST1L05CPU33RST1L05CPU33R:SON95P300X300X100-7N-DIC1
1STM32H755ZITxPackage_QFP:LQFP-144_20x20mm_P0.5mmU1

More from LiU-SeeGoals/Electronics

7
  • 4 layersPwr v3, the printed circuit board in 3D

    Pwr v3

    LiU-SeeGoals/Electronics

    Schematics etc.

    74 parts
  • 4 layers37.8 × 34.2 mmDriver seperate, the printed circuit board in 3D

    Driver seperate

    LiU-SeeGoals/Electronics

    Schematics etc.

    21 parts
  • 4 layers37.8 × 34.2 mmDriver seperate, the printed circuit board in 3D

    Driver seperate

    LiU-SeeGoals/Electronics

    Schematics etc.

    21 parts
  • 2 layers44 × 37.8 mmKicker breakout, the printed circuit board in 3D

    Kicker breakout

    LiU-SeeGoals/Electronics

    Schematics etc.

    16 parts
  • 4 layers25.4 × 21 mmImu LSM6DSL, the printed circuit board in 3D

    Imu LSM6DSL

    LiU-SeeGoals/Electronics

    Schematics etc.

    9 parts
  • 2 layers24 × 15.5 mmEnc v1 a, the printed circuit board in 3D

    Enc v1 a

    LiU-SeeGoals/Electronics

    Schematics etc.

    6 parts

Similar boards

  • 2 layers35.1 × 36.6 mmBinNanoFOC, the printed circuit board in 3D

    BinNanoFOC

    katbinaris/nanofoc_devkit

    Compact All-In-One BLDC Controler featuiring ESP32-S3, TMC6300 and Magalpha sensors. Small 35x35mm footprint.

    76 parts146
  • 4 layers55.9 × 30.5 mmVanguard, the printed circuit board in 3D

    Vanguard

    Frostydev-Avionics/Vanguard-PCB

    82 partsGPL-2.0
  • 4 layers32.5 × 105.2 mmZESP32, the printed circuit board in 3D

    ZESP32

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    42 parts269
  • 4 layers70 × 90 mmBldc controller routed, the printed circuit board in 3D

    Bldc controller routed

    rjwalters/kicad-tools

    Standalone Python tools for parsing and manipulating KiCad schematic and PCB files

    42 parts73MIT
  • 4 layers79 × 35 mmGlove v3-left, the printed circuit board in 3D

    Glove v3-left

    Eidon-AI/eidon-glove

    A robust 16-DOF hand/finger tracking wearable standard Bluetooth Human Interface Device (BLE HID) designed for humanoid teleoperation and collecting embodied AI training datasets.

    42 parts30
  • 4 layers30 × 24.5 mmDriver tmc2209, the printed circuit board in 3D

    Driver tmc2209

    calithameridi/corevus

    High-flexibility, low-cost mechatronics controller for 3D printers

    42 parts25
  • 4 layers97.8 × 25 mmMacIIROMSIMM, the printed circuit board in 3D

    MacIIROMSIMM

    garrettsworkshop/MacIIROMSIMM

    ROM SIMM for Apple Macintosh II-series and Macintosh SE/30 machines

    42 parts21

Questions

How big is the Devboard v1 PCB?

It measures 70 × 95 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Devboard v1 use?

42 parts, built around the ST1L05CPU33R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Devboard v1 KiCad files?

From the LiU-SeeGoals/Electronics repository on GitHub, at the commit this page was made from: the board is devboard_v1/devboard_v1.kicad_pcb and its schematic devboard_v1/devboard_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Devboard v1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask LiU-SeeGoals before reusing the design.