4 layers85 × 85 mm
EPS
carmamo/Avionics-FYCUS
This project involves the creation of the PCB and firmware for a 3U CubeSat, in collaboration with FYCUS, a team of passionate students at the University of Seville.
118 parts
2 layers99.7 × 73.7 mm
Ogl basestation
linuxianer99/ogl-basestation- Size
- 99.7 × 73.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 74
- Pads
- 127
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Aug 2026
- Updated
- 19 Aug 2026
Overview
Ogl basestation is an open-source printed circuit board by linuxianer99, from the linuxianer99/ogl-basestation repository on GitHub. It is a 2-layer board of 99.7 × 73.7 mm with 17 parts on 74 nets.
It is built around the RT8258GE and B230A. Its parts include 6 resistors, 4 diodes, 3 capacitors, 1 connector and 1 inductor. It belongs with the STM32 boards of this library.
Main components
2README
README.mdOpenGliderLaunch - Basestation
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 20R | Resistor_SMD:R_0402_1005Metric | R120, R121 |
| 2 | 20p | Resistor_SMD:R_0402_1005Metric | C100, C101 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R20 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 10uH CDRH75-100 | Inductor_SMD:L_7.3x7.3_H4.5 | L20 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric | R100 |
| 1 | 32.4k | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 4k7 | Resistor_SMD:R_0402_1005Metric | R122 |
| 1 | 8MHz | Crystal:Crystal_HC49-4H_Vertical | Y100 |
| 1 | AG12864E | Display:AG12864E | DS100 |
| 1 | B230A | Diode_SMD:D_SMA_Handsoldering | D21 |
| 1 | NRF905-Module | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | D100 |
| 1 | RT8258 | Package_TO_SOT_SMD:SOT-23-6_Handsoldering | D20 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | D1 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J120 |
Questions
How big is the Ogl basestation PCB?
It measures 99.7 × 73.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ogl basestation use?
17 parts, built around the RT8258GE and B230A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ogl basestation KiCad files?
From the linuxianer99/ogl-basestation repository on GitHub, at the commit this page was made from: the board is hardware/ogl-basestation/ogl-basestation.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ogl basestation design in my own project?
Its repository states no licence, so its author keeps all rights: ask linuxianer99 before reusing the design.
Similar boards
- 2 layers50 × 50 mm
Bobbycar lora can ethernet
bobbycar-graz/Telemetry-PCB
PCB with ESP32, CANbus, microSD, GPS and LoRa
53 parts7 - 2 layers42 × 45 mm
- 4 layers52.4 × 48.7 mm
Flight Controller v1
ckflight/FLIGHT_CONTROLLER_HARDWARE
SAM3X8E Peripheral rich flight controller pcb design
447 parts2 - 2 layers52 × 75 mm
Boardcomputer reinvented
bobbycar-reinvented/bobbycar-boardcomputer-reinvented
The boardcomputer reinvented!
141 parts1GPL-3.0 - 2 layers40 × 90 mm
Bobbycar emergency hardware
bobbycar-reinvented/bobbycar-emergency-hardware
A pcb designed to control the bobbycar in worst case scenario (dead boardcomputer)
43 parts1GPL-3.0 - 6 layers39.7 × 48.2 mm
- 2 layers50 × 35 mm
