
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

"Compile" kicad PCBs into files for ordering from JLCPCB
Relay is an open-source printed circuit board by limikael, from the limikael/kicad-fab-export repository on GitHub. It is a 2-layer board of 96.5 × 66 mm with 36 parts on 44 nets, routed with 210 tracks and 11 vias.
Its parts include 9 connectors, 6 resistors, 5 diodes, 4 ICs and 4 transistors. It belongs with the home automation and IoT boards of this library.
A scriptable CLI tool for generating JLCPCB manufacturing files directly from a KiCad PCB file.
It is designed for automated workflows and deterministic, CI-friendly PCB exports.
kicad-fab-export takes a KiCad PCB file (.kicad_pcb) as the single source of truth and generates JLCPCB-compatible manufacturing outputs:
bom.csv — Bill of Materialscpl.csv — Pick and Place (Centroid file)gerbers.zip — Gerber fabrication archiveIt does not require schematic files or project files.
.kicad_sch or .kicad_proEach footprint placed on the PCB is treated as a potential component.
A footprint is included in outputs only if it has the attribute:
lcsc → LCSC part number (required)Optional attributes:
lcscRot → Additional rotation offset applied in CPL generationFootprints without lcsc are ignored.
kicad-fab-export resolves footprint geometry by loading .kicad_mod files from provided footprint directories.
It doesn't try to resolve these automatically because they are a bit inconsistent from system to system. You probably want to do something like:
kicad-fab-export board.kicad_pcb \
-F /usr/share/kicad/footprints/ \
-o ./outIt does however check the project for a fp-lib-table file and reads project specific library paths from there.
pcb KiCad PCB file (.kicad_pcb)-o, --output <dir> Output directory
-F, --footprint-dir <path> Footprint directory (can be used multiple times)
-h, --help Show helpAll outputs are written to the specified output directory:
bom.csv
cpl.csv
gerbers.ziplcsc attribute are includedlcscRot if presentkicad-fab-export uses strict validation and will fail immediately on any inconsistency.
Errors include:
.kicad_mod filesNo partial output is produced on failure.
kicad-fab-export myboard.kicad_pcb -F ./libs -o ./outOutput:
out/
bom.csv
cpl.csv
gerbers.zipkicad-fab-export is intentionally minimal and deterministic:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5, U5, U6, U7, U8 |
| 4 | 1k | Resistor_SMD:R_0603_1608Metric | R11, R12, R13, R14 |
| 4 | ~ | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | ~ | Peabrain:ScrewTerminals_4P | J1, J2, J3, J4 |
| 4 | ~ | Diode_SMD:D_SOD-123 | D11, D12, D13, D14 |
| 4 | ~ | Relay_THT:Relay_SPDT_SANYOU_SRD_Series_Form_C | K1, K2, K3, K4 |
| 2 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | U3, U4 |
| 2 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | U1, U2 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 4.7k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ~ | Diode_SMD:D_SMA | D1 |
The 32 most common of 36 parts.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!


Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.


It measures 96.5 × 66 mm and has 2 copper layers, 1.6 mm thick.
36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the limikael/kicad-fab-export repository on GitHub, at the commit this page was made from: the board is spec/relay.kicad_pcb and its schematic spec/relay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask limikael before reusing the design.