
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

Info and website for donated LED screen hardware
Led panel connector is an open-source printed circuit board by limehouselabs, from the limehouselabs/led-screens repository on GitHub. It is a 2-layer board of 28.3 × 59.1 mm with 7 parts on 10 nets, routed with 53 tracks and 108 vias.
This repo runs led.limehouselabs.org and also contains some additional info and assets.
To develop on the static site:
git submodule update --init) to get the themehugo server in this directory.To keep the repo size small, please do not add large software installers to this repo. Upload them to the "Community Software" collection on archive.org and link them here.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | +5V | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J1 |
| 1 | DATA | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J2 |
| 1 | DATA | Connector_JST:JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal | J5 |
| 1 | GND | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J3 |
| 1 | POWER | Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J4 |
The 5 most common of 7 parts.

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 28.3 × 59.1 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the limehouselabs/led-screens repository on GitHub, at the commit this page was made from: the board is panel-connector/led-panel-connector.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask limehouselabs before reusing the design.