

MG touchpad
Kevin's analysis code
- Size
- 45.2 × 26.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 9
- Pads
- 29
- Tracks, vias
- 69, 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Apr 2018
- Updated
- 16 May 2024
Overview
MG touchpad is an open-source printed circuit board by limblab, from the limblab/proc-kevin repository on GitHub. It is a 2-layer board of 45.2 × 26.7 mm with 10 parts on 9 nets, routed with 69 tracks and 4 vias.
README
README.mdproc-kevin
Kevin's analysis code
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1k | Resistors_SMD:R_1206 | 1k, 1k, 1k |
| 1 | 3296Y | Potentiometers:Potentiometer_Trimmer_Bourns_3296Y | 3296Y |
| 1 | Conn_01x04 | Pin_Headers:Pin_Header_Angled_1x04_Pitch2.54mm | J1 |
| 1 | IR LED | Connectors_JST:JST_PH_B2B-PH-K_02x2.00mm_Straight | IR LED |
| 1 | IR Transistor | Connectors_JST:JST_PH_B2B-PH-K_02x2.00mm_Straight | IR Trans |
| 1 | LED | Connectors_JST:JST_PH_B2B-PH-K_02x2.00mm_Straight | LED |
| 1 | OP295 | Housings_DIP:DIP-8_W7.62mm | OP295 |
| 1 | R | Resistors_SMD:R_1206 | 100k |
More from limblab/proc-kevin
6- 2 layers62.1 × 72.2 mm

- 2 layers65.3 × 84.6 mm

- 2 layers44.2 × 45.5 mm

- 2 layers55 × 30 mm

- 2 layers32 × 48.4 mm

- 2 layers50.8 × 63.5 mm

Similar boards
- 2 layers57 × 55.2 mm

LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm

Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm

Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm

- 2 layers44.3 × 30.5 mm

Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm

Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k - 2 layers17.8 × 43.2 mm

Nano Adapter
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
10 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
10 parts1kGPL-3.0
Questions
How big is the MG touchpad PCB?
It measures 45.2 × 26.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MG touchpad use?
10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MG touchpad KiCad files?
From the limblab/proc-kevin repository on GitHub, at the commit this page was made from: the board is kicad/MG_touchpad/MG_touchpad.kicad_pcb and its schematic Circuits/Pancake_Wireless_EMG/Pancake_Wireless_EMG.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MG touchpad design in my own project?
Its repository states no licence, so its author keeps all rights: ask limblab before reusing the design.