4 layers25.3 × 16.8 mm
DataAcq EnvBreakoutPCB
lhr-solar/DataAcq-EnvBreakoutPCB
Breakout Board for Data Acquisition's environment breakout PCB
22 parts1
2 layers53.9 × 59 mm
DataAcq EnvironmentBoard
lhr-solar/DataAcq-EnvironmentBoard1TODO: Add connectors/pinout guide, testpoints, bom, schematic, pcb, etc.
- Size
- 53.9 × 59 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 36
- Pads
- 112
- Tracks, vias
- 147, 40
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Oct 2024
- Updated
- 16 Apr 2025
Overview
DataAcq EnvironmentBoard is an open-source printed circuit board by lhr-solar, from the lhr-solar/DataAcq-EnvironmentBoard repository on GitHub, published under the MIT licence. It is a 2-layer board of 53.9 × 59 mm with 33 parts on 36 nets, routed with 147 tracks and 40 vias.
It is built around the FS3000-1005 and LMT87DCK. Its parts include 7 capacitors, 6 diodes, 4 ICs, 3 resistors and 3 connectors.
Main components
2README
Readme.mdDataAcq-EnvironmentBoard
The Data Acquisition Environment Board measures environmental data throughout the car, including humidity, airflow, and temperature. It interfaces with a PSOM to send data via CAN bus.
TODO: Add connectors/pinout guide, testpoints, bom, schematic, pcb, etc.
Mouser Cart: https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=8fef7b51e5
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C5, C6 |
| 4 | ESD9B | Diode_SMD:D_SOD-923 | D3, D4, D5, D6 |
| 4 | TestPoint | UTSVT_Special:TestPoint_HEX_3mmID | TP1, TP2, TP4, TP5 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C4, C7 |
| 2 | 250mA | Fuse:Fuse_0603_1608Metric | F1, F2 |
| 1 | 12V | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 2.2k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 22.1k | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 3.3V | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | Arrow | images:arrow | LOGO1 |
| 1 | Breakout Connector | Connector_Molex:Molex_Nano-Fit_105310-xx10_2x05_P2.50mm_Vertical | J6 |
| 1 | CAN Input | UTSVT_Connectors:Molex_MicroFit3.0_1x4xP3.00mm_PolarizingPeg_Vertical | J3 |
| 1 | CAN Output | UTSVT_Connectors:Molex_MicroFit3.0_1x4xP3.00mm_PolarizingPeg_Vertical | J2 |
| 1 | Daughterboard Connector | UTSVT_Special:PeripheralSOM | U4 |
| 1 | Dr. Hallock | UTSVT_Special:Hallock_Image_Tiny | LOGO2 |
| 1 | FS3000-1005 | SamacSys_Parts:FS30001005 | U2 |
| 1 | LMT87DCK | Package_TO_SOT_SMD:SOT-353_SC-70-5 | U3 |
| 1 | SHT45 | Sensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U1 |
| 1 | UTSVT Logo | UTSVT_Special:UTSVT_Logo_Symbol | LOGO3 |
| 1 | Wolf | images:wolf | LOGO4 |
Similar boards
- 2 layers41 × 56.3 mm
- 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k - 2 layers92.7 × 58.4 mm
Hacky holidays
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
33 parts915 - 2 layers240 × 120 mm
Quiver PDB 01
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
33 parts617CERN-OHL-S-2.0 - 2 layers75 × 26 mm
DIY detector
ozel/DIY_particle_detector
A mobile low-cost spectrometer for measuring radioactivity and the energy of ionising radiation like alpha particles and electrons
33 parts558BSD-2-Clause - 2 layers100 × 50 mm
Pixelix
BlueAndi/Pixelix
Full RGB LED matrix, based on an ESP32 and WS2812B LEDs or emulated LEDs on TFT.
33 parts447MIT
Questions
How big is the DataAcq EnvironmentBoard PCB?
It measures 53.9 × 59 mm and has 2 copper layers, 1.6 mm thick.
What parts does the DataAcq EnvironmentBoard use?
33 parts, built around the FS3000-1005 and LMT87DCK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DataAcq EnvironmentBoard KiCad files?
From the lhr-solar/DataAcq-EnvironmentBoard repository on GitHub, at the commit this page was made from: the board is Hardware/DataAcq-EnvironmentBoard.kicad_pcb and its schematic Hardware/DataAcq-EnvironmentBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the DataAcq EnvironmentBoard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).