
Solarinverter
cpipero/solarinverter
Kicad Project to build a programmable Solar Inverter

DCDC FusePCB is an open-source printed circuit board by lhr-solar, from the lhr-solar/DCDC-FusePCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 172.9 × 39 mm with 30 parts on 14 nets, routed with 73 tracks and 4 vias.
It is built around the FDP3651U and TCMT1100. Its parts include 6 connectors, 5 resistors, 3 ICs, 2 diodes and 1 capacitor. It belongs with the power boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | Conn_01x02_Socket | Connector_Molex:Molex_Sabre_43160-0102_1x02_P7.49mm_Vertical | J1, J2, J3, J4, J6 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 22.1k | Resistor_SMD:R_0805_2012Metric | R4, R5 |
| 2 | FDP3651U | footprints:TO-220-3_16P51X10P67_ONS | U1, U3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | RH1, RH2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | Fuse | UTSVT_Passive:FUSE_05200101Z_LTF | F1 |
| 1 | LOGO | UTSVT_Special:UTSVT_Logo_Symbol | G*** |
| 1 | LOGO | UTSVT_Special:Hallock_Image_Tiny | G*** |
| 1 | LOGO | UTSVT_Special:wolf front | G*** |
| 1 | Precharge Resistor Breakout | Connector_Molex:Molex_Sabre_43160-0102_1x02_P7.49mm_Vertical | J5 |
| 1 | TCMT1100 | Package_SO:SOP-4_4.4x2.6mm_P1.27mm | U2 |
The 23 most common of 30 parts.

cpipero/solarinverter
Kicad Project to build a programmable Solar Inverter

PySpice-org/eda-rw
Python library to read/write KiCad and LibrePCB Sexpr file format

FHafting/BREAD
This project is fully documented in the paper: Shane Oberloier, Nicholas G. Whisman, Finn Hafting, Joshua M. Pearce, Open Source Framework for a Broadly Expandable and Reconfigurable Data Acquisition and Automation…

dovy6/Faiked
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…

Nicolboy/KICAD-C2000-powershield
Shield d'isolation, alimentation et interconnexion pour TMS320 C2000, conçu sous KiCad 10.


Rsa76d/FaikoutRSA
This project is subject to the licence in the LICENCE file, and even if that says it is an open source project, you cannot sell boards or cases bearing the Andrews & Arnold Ltd name, the A&A logo, the registered…

It measures 172.9 × 39 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the FDP3651U and TCMT1100. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lhr-solar/DCDC-FusePCB repository on GitHub, at the commit this page was made from: the board is DCDC-FusePCB.kicad_pcb and its schematic DCDC-FusePCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).