
Curve tracer
lhr-solar/Power-Generation-Curve-Tracer
The current maintainer of this project is Matthew Yu as of 05/20/2023. His email is matthewjkyu@gmail.com.

Standalone irradiance board for testing PV's photovoltaics with the IV curve tracer
Irradiance1 is an open-source printed circuit board by lhr-solar, from the lhr-solar/Array-Blackbody-B-PCB repository on GitHub, published under the MIT licence. It is a 2-layer board of 61 × 75 mm with 30 parts on 23 nets, routed with 199 tracks and 23 vias.
It is built around the CDSOT23-T24CAN. Its parts include 9 capacitors, 6 resistors, 4 connectors, 3 ICs and 3 diodes.
Standalone irradiance board for testing PV's photovoltaics with the IV curve tracer
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1u | Capacitors_SMD:C_0805_HandSoldering | C11, C14, C15, C16, C17 |
| 3 | 330 | Resistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R0, R1, R2 |
| 2 | 10u | Capacitors_SMD:C_0805_HandSoldering | C10, C13 |
| 2 | 2k | Inductors_SMD:L_0805_HandSoldering | L2, L3 |
| 2 | 60 | Resistors_SMD:R_0805_HandSoldering | R9, R10 |
| 2 | MountingHole | Mounting_Holes:MountingHole_2.2mm_M2 | H1, H2 |
| 1 | 0 | Resistors_SMD:R_0805_HandSoldering | R25 |
| 1 | 0.01u | Capacitors_SMD:C_0805_HandSoldering | C12 |
| 1 | 0.22u | Capacitors_SMD:C_0805_HandSoldering | C9 |
| 1 | ADM3055E | irradianceboard:ADM3055EBRIZ | U1 |
| 1 | Battery | Connectors_Molex:Molex_KK-6410-02_02x2.54mm_Straight | J6 |
| 1 | CAN_In | irradianceboard:Molex_Micro-Fit_3.0_43650-0415_1x04_P3.00mm_Vertical | J4 |
| 1 | CAN_Out | irradianceboard:Molex_Micro-Fit_3.0_43650-0415_1x04_P3.00mm_Vertical | J5 |
| 1 | CAN_RX | LEDs:LED_D3.0mm | D1 |
| 1 | CAN_TX | LEDs:LED_D3.0mm | D0 |
| 1 | CDSOT23-T24CAN | TO_SOT_Packages_SMD:SOT-23 | U7 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J0 |
| 1 | HEARTBEAT | LEDs:LED_D3.0mm | D2 |
| 1 | Nucleo_L432KC | irradianceboard:MODULE_NUCLEO-L432KC | U2 |
| 1 | Termination Resistors | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | JP1 |

lhr-solar/Power-Generation-Curve-Tracer
The current maintainer of this project is Matthew Yu as of 05/20/2023. His email is matthewjkyu@gmail.com.

corbosiny/SolarCar
All code relating to solar car like: BPS, telemetry, web dev, and more.

lhr-solar/PS-BPSLeader
Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.

dimembermatt/MPPT-Design
Design and documentation of a custom MPPT for LHR Solar. Created in part with Professor Alex Hanson's ECE 394J Power Electronics Class.


bartkepl/CanGeigerProbe
Polowa sonda promieniowania jonizującego z miniaturową lampą Geigera-Müllera, komunikująca się cyfrowo przez CAN 2.0B.

bartkepl/CanGnssNode
Polowy węzeł pozycyjny z modułem GNSS Quectel L76-L (GPS/GLONASS/Galileo/QZSS) i czujnikiem orientacji (akcelerometr + magnetometr), komunikujący się cyfrowo przez CAN 2.0B.

desvandi/PLTSMonitoring_Firmware-Backend
Integrated to PLTSMonitoring_PWA
It measures 61 × 75 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the CDSOT23-T24CAN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lhr-solar/Array-Blackbody-B-PCB repository on GitHub, at the commit this page was made from: the board is irradiance1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).