

Happy light
Happy Light =========== A custom wake-up light PCB and arduino code.
- Size
- 80 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 20
- Nets
- 37
- Pads
- 92
- Tracks, vias
- 86, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 14 Nov 2022
- Updated
- 27 Jan 2025
Overview
Happy light is an open-source printed circuit board by lewisamarshall, from the lewisamarshall/happy_light repository on GitHub. It is a 2-layer board of 80 × 95 mm with 20 parts on 37 nets, routed with 86 tracks and 0 vias.
It is built around the M20-9990546. Its parts include 5 connectors, 4 resistors, 4 transistors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdHappy Light
A custom wake-up light PCB and arduino code.
Lights
Intended for use with Adafruit RGBW LED Strip. These run at 12 V, and draw up to 1.6A/meter, or 400 mA/meter per color.
Power
The board is intended to run on 12V power input (both microcontroller and LED power). For a full spool (4m) of the lights above, this could be about 80W total. Power is controlled by 4x TO-3 darlington power transistors.
Control
This is designed for an Arduino Nano. The firmware assumes a Nano 33 IOT, to get network time.
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 4 | M20-9990546 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2, J3, J4, J5 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H4 |
| 4 | NTE245 | Package_TO_SOT_THT:TO-3 | Q1, Q2, Q3, Q4 |
| 1 | 1935161 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | Arduino_Nano_Socket | Arduino:Arduino_Nano_Socket | XA1 |
| 1 | RotaryEncoder_Switch | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | SW1 |
| 1 | SW_SP3T | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | SW2 |
Similar boards
- 4 layers108 × 50 mm

- 2 layers16 × 26 mm

- 4 layers50 × 88.5 mm

- 2 layers66.9 × 74.5 mm

- 2 layers86.4 × 64.8 mm

- 2 layers36.2 × 26.8 mm

Esp32 minimal
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
20 parts4kMIT - 2 layers108.1 × 393.8 mm

Sweep compact ble
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
20 parts2.1k - 2 layers26 × 15.9 mm

TPS54340 Buck Regulator
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
20 parts1.2k
Questions
How big is the Happy light PCB?
It measures 80 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Happy light use?
20 parts, built around the M20-9990546. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Happy light KiCad files?
From the lewisamarshall/happy_light repository on GitHub, at the commit this page was made from: the board is pcb/happy_light.kicad_pcb and its schematic pcb/happy_light.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Happy light design in my own project?
Its repository states no licence, so its author keeps all rights: ask lewisamarshall before reusing the design.