2 layers17 × 17 mm
2 layers56.5 × 13.3 mm
Kitronik motor board extender
lewfer/BitMakeLab1Resources for digital making projects
- Size
- 56.5 × 13.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 21
- Pads
- 63
- Tracks, vias
- 44, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Apr 2024
- Updated
- 11 Oct 2026
Overview
Kitronik motor board extender is an open-source printed circuit board by lewfer, from the lewfer/BitMakeLab repository on GitHub. It is a 2-layer board of 56.5 × 13.3 mm with 3 parts on 21 nets, routed with 44 tracks and 0 vias.
It belongs with the robots and motor control boards of this library.
README
README.mdParts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Conn_01x21_Pin | Connector_PinHeader_2.54mm:PinHeader_1x21_P2.54mm_Vertical | J1, J2, J3 |
More from lewfer/BitMakeLab
5- 2 layers17 × 17 mm
- 2 layers17 × 17 mm
- 2 layers35 × 17 mm
- 2 layers35 × 17 mm
Similar boards
- 2 layers40 × 30 mm
- 2 layers51.9 × 16 mm
Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm
- 2 layers
Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm
- 2 layers124.5 × 33.7 mm
- 2 layers10.5 × 83 mm
- 2 layers21.2 × 51.3 mm
Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the Kitronik motor board extender PCB?
It measures 56.5 × 13.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Kitronik motor board extender use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kitronik motor board extender KiCad files?
From the lewfer/BitMakeLab repository on GitHub, at the commit this page was made from: the board is kit making/KiCad/kitronik-motor-board-extender/kitronik-motor-board-extender.kicad_pcb and its schematic kit making/KiCad/button/button/button.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kitronik motor board extender design in my own project?
Its repository states no licence, so its author keeps all rights: ask lewfer before reusing the design.