
PowerBook
BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350

Oddball steno is an open-source printed circuit board by levimdmiller, from the levimdmiller/oddball_steno repository on GitHub. It is a 2-layer board of 133.4 × 132.1 mm with 83 parts on 95 nets, routed with 412 tracks and 2 vias.
Its parts include 30 switches, 28 diodes, 5 connectors, 4 resistors and 4 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 28 | Diode | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +12 |
| 23 | Keyswitch | ScottoKeebs_MX:MX_PCB_1.00u | S2, S10, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S24, S25, S26, S27 +7 |
| 4 | 4.7k | Keebio-Parts:Resistor | R1, R2, R3, R4 |
| 4 | Conn_01x04 | Connector_Wire:SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mm | J2, J4, J5, J6 |
| 3 | , , | ||
| 3 | Keyswitch | ScottoKeebs_MX:MX_PCB_2.00u_90deg | S6, S11, S22 |
| 2 | Elite-C | Keebio-Parts:Elite-C | U1, U3 |
| 2 | SW_SPST | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW1, SW2 |
| 2 | TRRS | ScottoKeebs_Components:TRRS_PJ-320A | U2, U4 |
| 1 | Conn_02x04_Counter_Clockwise | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J3 |
| 1 | Keyswitch | ScottoKeebs_MX:MX_PCB_4.00u | S1 |
| 1 | Keyswitch | ScottoKeebs_MX:MX_PCB_6.00u | S23 |
The 74 most common of 83 parts.

BlueSCSI/BlueSCSI-v2
BlueSCSI v2/Ultra - an open source, open hardware, SCSI emulator using the Pi Pico PR2040 and Pico 2 RP2350


GaudiLabs/OpenLaserScanningMicroscope
Open Source Laser Scanning Microscope



plinkysynth/plinky_public
a public release of the plinky sw and hw

freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

zoemaestra/hair-electrolysis-machine-usb-c
A fork of scd31's hair electrolysis machine but with USB-C and optimised for cheaper assembly with JLCPCB
It measures 133.4 × 132.1 mm and has 2 copper layers, 1.6 mm thick.
83 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the levimdmiller/oddball_steno repository on GitHub, at the commit this page was made from: the board is kicad/oddball_steno.kicad_pcb and its schematic kicad/left.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask levimdmiller before reusing the design.