2 layers168 × 109.2 mm
2 layers42.1 × 47.8 mm
NESControllerToUSB
letoine/NESControllerToUSBSimple adapter that transforms a NES controller into a USB controller.
- Size
- 42.1 × 47.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 18
- Pads
- 78
- Tracks, vias
- 127, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 10 Nov 2014
- Updated
- 16 Nov 2014
Overview
NESControllerToUSB is an open-source printed circuit board by letoine, from the letoine/NESControllerToUSB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 42.1 × 47.8 mm with 14 parts on 18 nets, routed with 127 tracks and 0 vias.
It is built around the ATMEGA32U2-AU. Its parts include 5 capacitors, 4 connectors, 3 resistors, 1 IC and 1 crystal. It belongs with the retro computing and games and interfaces and adapters boards and the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdNESControllerToUSB
Simple adapter that transforms a NES controller into a USB controller.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nf | SM0603_Capa | C3, C5 |
| 2 | 22ohms | SM0603 | R1, R2 |
| 2 | 22p | SM0603_Capa | C1, C2 |
| 1 | 10K | SM0603 | R3 |
| 1 | 16Mhz | HC-49V | X1 |
| 1 | 1uf | SM0603_Capa | C4 |
| 1 | ATMEGA32U2-AU | TQFP32 | U1 |
| 1 | AVR-ISP6 | pin_array_3x2 | CON1 |
| 1 | NES_CONT_SOCKET | NES_CONT_SOCKET | J2 |
| 1 | SNES_CONT_SOCKET | SNES_CONT_SOCKET | J3 |
| 1 | USB | USB_B | J1 |
Similar boards
- 2 layers194.3 × 79 mm
- 2 layers57.2 × 38.9 mm
Cookpad pad
cookpad/cookpad-pad
Cookpad Pad — A six keys macro pad made by Cookpad.
32 parts76Apache-2.0 - 2 layers120.1 × 52.3 mm
- 2 layers23.7 × 30.5 mm
- 2 layers73 × 38.1 mm
- 2 layers190.5 × 83.2 mm
Endeavour-2
ScatteredDrifter/Endeavour
An 38 key orthogonal Keyboard with 3d printable case
111 parts13CERN-OHL-P-2.0 - 2 layers18.7 × 36.5 mm
TMS6100
simoninns/TMS6100-Emulator
TMS6100 speech PHROM (PHrase Read Only Memory) hardware emulator for use with the TMS5220 Voice Synthesis Processor in an Acorn BBC Microcomputer
9 parts13GPL-3.0
Questions
How big is the NESControllerToUSB PCB?
It measures 42.1 × 47.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the NESControllerToUSB use?
14 parts, built around the ATMEGA32U2-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NESControllerToUSB KiCad files?
From the letoine/NESControllerToUSB repository on GitHub, at the commit this page was made from: the board is hardware/NESControllerToUSB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the NESControllerToUSB design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).