Skip to the content
2 layers86 × 38 mmStlink ex c, the printed circuit board in 3D

stlink kicad ex

Size
86 × 38 mm
Copper layers
2
Thickness
1.6 mm
Parts
5
Nets
11
Pads
54
Tracks, vias
82, 0
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
5 May 2025
Updated
31 May 2025

Overview

Stlink ex c is an open-source printed circuit board by lessthan00, from the lessthan00/stlink_ex_c repository on GitHub. It is a 2-layer board of 86 × 38 mm with 5 parts on 11 nets, routed with 82 tracks and 0 vias.

README

README.md

stlink_ex_c

这是ST-LINK的转接板

stlink_ex_c: pin5 改为 pin7 , 改为VDD SWDIO SWCLK GND NRST JTDI JTDO

stlink_ex_b: 修改了板子的形状, 2x7 2x5 改为简易牛角接口, 丝印改到正确的位置

stlink_ex_a: JTGA 和SWD1.27mm间距和2.54mm间距

Parts

5
QtyValueFootprintReferences
1Conn_01x07Connector_PinHeader_1.27mm:PinHeader_1x07_P1.27mm_VerticalJ17
1Conn_01x07Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_VerticalJ16
1Conn_02x05_Odd_EvenConnector_IDC:IDC-Header_2x05_P2.54mm_VerticalJ14
1Conn_02x05_Odd_EvenConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_VerticalJ15
1Conn_02x10_Odd_EvenConnector_IDC:IDC-Header_2x10_P2.54mm_VerticalJ5

Similar boards

  • 2 layers98 × 27 mmXy limit, the printed circuit board in 3D

    Xy limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    5 parts3.7k
  • 2 layers21 × 33 mm24g2usb pico2w, the printed circuit board in 3D

    24g2usb pico2w

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    5 parts1.7kApache-2.0
  • 2 layers53.2 × 59.6 mmA10 OLinuXino Lime Rev B SHIELD TEMPLATE, the printed circuit board in 3D

    A10 OLinuXino Lime Rev B SHIELD TEMPLATE

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    5 parts1.5k
  • 2 layers30 × 11 mmMain control board servo tester, the printed circuit board in 3D

    Main control board servo tester

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    5 parts1.1k
  • 2 layers78.8 × 35.3 mmKiCadTest, the printed circuit board in 3D

    KiCadTest

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    5 parts915
  • 2 layers50 × 23 mmMiniCircuits LTCC, the printed circuit board in 3D

    MiniCircuits LTCC

    VanceVagell/kv4p-ht

    Open source handheld ham radio project KV4P-HT

    5 parts828GPL-3.0
  • 2 layers20.3 × 15.2 mmL0 light sensor, the printed circuit board in 3D

    L0 light sensor

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    5 parts546MIT

Questions

How big is the Stlink ex c PCB?

It measures 86 × 38 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Stlink ex c use?

5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stlink ex c KiCad files?

From the lessthan00/stlink_ex_c repository on GitHub, at the commit this page was made from: the board is stlink_ex_c.kicad_pcb and its schematic stlink_ex_c.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stlink ex c design in my own project?

Its repository states no licence, so its author keeps all rights: ask lessthan00 before reusing the design.