

Bus Interface Prototyp
- Size
- 38.5 × 35 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 20
- Pads
- 59
- Tracks, vias
- 123, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 14 Dec 2025
- Updated
- 24 Jan 2026
Overview
Bus Interface Prototyp is an open-source printed circuit board by LeoWatti99, from the LeoWatti99/CANTram-Framework repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 38.5 × 35 mm with 21 parts on 20 nets, routed with 123 tracks and 9 vias.
It is built around the SN65HVD230QDRG4Q1, L78L33ABUTR-CN and 156120GS75000. Its parts include 3 resistors, 3 ICs, 3 connectors, 1 capacitor and 1 diode. It belongs with the interfaces and adapters boards of this library.
Main components
3SN65HVD230QDRG4Q1
SOIC-8-40℃~+125℃ 17mA 1Mbps 3V~3.6V 600uA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversL78L33ABUTR-CN
SOT-89-30℃~+125℃ 1.7V 100mA 20V 3.3V 40dB@(120Hz) 40uV 6mA Fixed Over Temperature Protection、Short Circuit Protection SOT-89-3 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSChipNoboVoltage Regulators - Linear, Low Drop Out (LDO) Regulators156120GS75000
1206140° 20mA 235mcd 3.3V 520nm 525nm Emerald Green Water Clear 1206 LED Indication - Discrete ROHSWürth ElektronikLight Emitting Diodes (LED)
README
README.mdCAN-TRAM-Framework
Das CAN-TRAM-Framework ist ein mikrocontrollerbasiertes, modulares Steuerungssystem, dass sich aus einzelnen Modulen zusammensetzen lässt. Die Struktur des Systems orientiert sich an üblichen SPS-Systemen, sodass eine CPU bzw. ein Hauptmodul um beliebig viele Module erweitert werden kann, um Funktionen hinzuzufügen.
Inventor CAD Dateien öffnen
Die CAD Dateien des Projekts sind im Ordner Inventor CAD) enthalten. Um das Projekt wie vorgesehen zu öffnen muss in Inventor 2025 oder höher die Datei Controller.ipj geöffnet werden.
KiCAD Schaltungen öffnen
Im Ordner KiCad Schaltungen sind alle Projekte der einzelnen Platinen enthalten. Darin befinden sich sowhol Prototypen Schaltungen als auch aktuelle Modulplatinen. Um die Projekt zu öffnen wird KiCAD 9.0.6 benötigt. über die .kicad_pro-Dateien in den Unterordnern können die Projekte vollständig mit der Verlinkung zwischen Schaltplan und Layout geöffnet werden.
C++ Framework
Die Firmware des Systems ist als C++ Bibliothek im Ordner Framework enthalten.
Dokumentation
Die Software-Dokumentation kann hier geöffnet werden. Sie wird automatisch durch Doxygen erstellt und nach Änderungen des Codes aktualisiert.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | 3V3F, 3V3L, 5V, 24V |
| 2 | TestPoint_Probe | TestPoint:TestPoint_Keystone_5000-5004_Miniature | GNDB, GNDL |
| 1 | 10k | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 10u | Capacitor_SMD:C_1206_3216Metric | C2 |
| 1 | 120 | Resistor_SMD:R_1206_3216Metric | R3 |
| 1 | 156120GS75000 | SamacSys_Parts:156120GS75000 | LED1 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | ISO7721FDR | SamacSys_Parts:SOIC127P600X175-8N | IC2 |
| 1 | L78L33ABUTR | SamacSys_Parts:L78L33ABUTR | IC3 |
| 1 | RSH3-2405S_H2-R | SamacSys_Parts:RSH32405SH2R | PS1 |
| 1 | SN65HVD230QDRG4Q1 | SamacSys_Parts:SOIC127P600X175-8N | IC1 |
The 18 most common of 21 parts.
More from LeoWatti99/CANTram-Framework
12- 2 layers100 × 38 mm

- 2 layers100 × 38 mm

- 2 layers55 × 42 mm

- 2 layers100 × 61 mm

- 2 layers65 × 37 mm

- 2 layers45.5 × 37.3 mm

- 2 layers69 × 86 mm

- 2 layers100 × 38 mm

- 2 layers100 × 38 mm

- 2 layers32.5 × 33 mm

- 2 layers36.5 × 25.5 mm

- 2 layers55.5 × 18 mm

Similar boards
- 2 layers68 × 58 mm

Iot data logger nfc samd21
polesskiy-dev/iot-risk-data-logger-nfc-samd21-hardware
Hardware (schematics, PCB, BOM) for iot-risk-data-logger-nfc-samd21 project
66 parts5MIT - 6 layers48 × 52 mm

Kestrel esc
HeyPCB/kestrel-esc
Kestrel 4in1: 6S 4-in-1 ESC running stock AM32 on four STM32G071s, with 24 CSD18540 FETs, LM5109B drivers and battery current sensing. 48 x 52 mm 6-layer KiCad 10 board, DRC clean, with gerbers, BOM, CPL and STEP.
174 partsCERN-OHL-S-2.0 - 2 layers62 × 50 mm

Driver
jkirsons/stealth-controller
With 8A driver, Magnetic Sensor, Microcontroller, Two-Wire Automotive Interface
50 parts93 - 2 layers50 × 36 mm

- 2 layers66.1 × 70.8 mm

- 2 layers28.3 × 39.8 mm

LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm

Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm

Questions
How big is the Bus Interface Prototyp PCB?
It measures 38.5 × 35 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bus Interface Prototyp use?
21 parts, built around the SN65HVD230QDRG4Q1, L78L33ABUTR-CN and 156120GS75000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bus Interface Prototyp KiCad files?
From the LeoWatti99/CANTram-Framework repository on GitHub, at the commit this page was made from: the board is KiCad Schaltungen/Bus Interface Prototyp/Bus Interface Prototyp/Bus Interface Prototyp.kicad_pcb and its schematic KiCad Schaltungen/Analog Input Prototyp/Analog Input Prototyp/Analog Input Prototyp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bus Interface Prototyp design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).