Skip to the content
2 layersRGBLed MDversion, the printed circuit board in 3D

RGBLed MDversion

LeonAbelmann/MagOD1

Software for Magnetic Optical Density meter

Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
11
Pads
18
Tracks, vias
13, 0
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
13 Jan 2019
Updated
27 Sep 2023

Overview

RGBLed MDversion is an open-source printed circuit board by LeonAbelmann, from the LeonAbelmann/MagOD repository on GitHub, published under the MIT licence. It is a 2-layer board with 6 parts on 11 nets, routed with 13 tracks and 0 vias.

Its parts include 3 resistors, 2 connectors and 1 diode.

README

README.md

MagOD

Magnetic Optical Density meter Tijmen Hageman, Jordi Hendrix, Hans Keizer, Marcel Welleweerd, Dave van As, Ruthvik Bandaru, Rob Krawinkel, Leon Abelmann.

KIST Europe, University of Twente

Other sources

Next to software, also the source codes to create hardware are available here, as well as :

  • Measurement head design, 3D print file (OpenSCAD, on Thingiverse )
  • Spice simulations, electronic diagrams, PCB layout (Spice, KiCad on Dropbox)
  • Laser cut pattern for housing electronics (DXF, on Dropbox)

Specifications

  • Up to 800 samples per second, allows precise analysis of the rotation speed of magnetic bacteria
  • Three-dimensional quasi-Helmholtz configuration, with fields up to 5 mT
  • Three color LED: red: 645 nm, 1000 mcd, green: 520 nm, 1700 mcd and blue 460 nm, 500 mcd
  • Power supply with current feedback to compensate for coil heating, cut-off frequency 200 Hz
  • Large area photodiode (sensitivity 0.5 mlx, with green LED theoretical max OD range of 5.8)
  • Integrated pre-amplifier, SNR 83 dB (max OD range 4.0).
  • Dedicated 16-bit ADS1115 DA converter
  • Integrated temperature sensor
  • Reference light detector
  • Scattered light detector
  • Fully programmable (ESP32 using Arduino IDE), open source
  • User friendly spreadsheet recipe definition (csv format), with software to validate correctness
  • Data collection on SD card, accessible by ftp over Wifi

Additional info

How to join

Send mail to Leon (l.abelmann@tudelft.nl) if you are interested, all skills are welcome.

Parts

6
QtyValueFootprintReferences
3RResistors_SMD:R_0805R1, R2, R3
2Conn_01x04Socket_Strips:Socket_Strip_Straight_1x04_Pitch2.54mmJ1, J2
1LED_RABGKingbrightRGB:L-154A4SUREQBFZGEWD1

More from LeonAbelmann/MagOD

10
  • 2 layers180 × 95.5 mmODMeter, the printed circuit board in 3D

    ODMeter

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    153 parts1MIT
  • 4 layers77 × 93 mmODMeter, the printed circuit board in 3D

    ODMeter

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    87 parts1MIT
  • 4 layers27.2 × 27.2 mmPhotoDiode MDversion1.2, the printed circuit board in 3D

    PhotoDiode MDversion1.2

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    19 parts1MIT
  • 4 layers27.2 × 27.2 mmPhotoDiode MDversion1.3, the printed circuit board in 3D

    PhotoDiode MDversion1.3

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    19 parts1MIT
  • 4 layers27.2 × 27.2 mmPhotoDiode MDversion1.3, the printed circuit board in 3D

    PhotoDiode MDversion1.3

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    18 parts1MIT
  • 4 layers26.8 × 26.8 mmPhotoDiode MDversion, the printed circuit board in 3D

    PhotoDiode MDversion

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    15 parts1MIT
  • 2 layers32.8 × 32.8 mmRefPhotoDiode MDversion, the printed circuit board in 3D

    RefPhotoDiode MDversion

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    12 parts1MIT
  • 2 layersLED, the printed circuit board in 3D

    LED

    LeonAbelmann/MagOD

    Software for Magnetic Optical Density meter

    4 parts1MIT

Similar boards

  • 2 layers18.5 × 11.1 mmSwitch, the printed circuit board in 3D

    Switch

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    6 parts4.3kMIT
  • 2 layers14.6 × 33 mmBrain board SD Card 1, the printed circuit board in 3D

    Brain board SD Card 1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    6 parts1.2k
  • 2 layers9 × 9 mmDpoint, the printed circuit board in 3D

    Dpoint

    Jcparkyn/dpoint

    Open-source digital stylus using camera tracking and inertial measurements

    6 parts1.1kMIT
  • 2 layers51.5 × 16.6 mmMicroswitchXY Endstop, the printed circuit board in 3D

    MicroswitchXY Endstop

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    6 parts1.1kGPL-3.0
  • 2 layers21.9 × 76.7 mmAmiga External, the printed circuit board in 3D

    Amiga External

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    6 parts1kGPL-3.0
  • 2 layers88.9 × 50.8 mmBusinesscard, the printed circuit board in 3D

    Businesscard

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    6 parts915
  • 2 layers20.3 × 15.2 mmL0 RGB led, the printed circuit board in 3D

    L0 RGB led

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    6 parts546MIT
  • 2 layers9 × 3.6 mmOpticalEncoder, the printed circuit board in 3D

    OpticalEncoder

    adamb314/ServoProject

    Getting the most out of your hobby servo

    6 parts545

Questions

What parts does the RGBLed MDversion use?

6 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RGBLed MDversion KiCad files?

From the LeonAbelmann/MagOD repository on GitHub, at the commit this page was made from: the board is MeasurementHeads/OlderVersions/LED_RGB/RGBLed_MDversion.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the RGBLed MDversion design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).