

Mixer1
Eurorack synthesizer module designs
- Size
- 88.8 × 108.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 28
- Pads
- 137
- Tracks, vias
- 190, 9
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 Dec 2021
- Updated
- 27 Nov 2024
Overview
Mixer1 is an open-source printed circuit board by Len42, from the Len42/Synth repository on GitHub. It is a 2-layer board of 88.8 × 108.2 mm with 44 parts on 28 nets, routed with 190 tracks and 9 vias.
Its parts include 15 resistors, 9 capacitors, 7 connectors, 3 diodes and 2 ICs. It belongs with the audio and music boards of this library.
README
modules/Noise-SH/README.mdNoise / Sample & Hold
4HP Eurorack Module
Features
- White and pink(ish) noise output
- Sample-and-hold with variable slew rate
- S&H can be triggered by an internal clock or external input
- Internal clock is output on the trigger jack when selected
Notes
This module is built using the Delptronics Module Construction Set which includes PCBs for the front panel controls and other components. The PCB layout file is just a guide showing how I placed the components on the Delptronics boards. (It's a bit of a mess - sorry!)
Please note that I am a hobbyist, not a trained electronics engineer. No guarantees!
Acknowledgements
Software Used
KiCad 5.1.10-1
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100K | -lmp-misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R7, R8, R9, R10, R11 |
| 5 | 100N | -lmp-misc:C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C4, C5, C6, C8 |
| 4 | 100K | -lmp-synth:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1, RV2, RV3, RV4 |
| 4 | WQP-PJ398 | -lmp-synth:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical | J1, J2, J3, J4 |
| 2 | 10K | -lmp-misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13, R14 |
| 2 | 10U | -lmp-misc:CP_Radial_D5.0mm_P2.50mm | C1, C2 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3 |
| 2 | 5P6 | -lmp-misc:C_Disc_D5.0mm_W2.5mm_P2.50mm | C7, C9 |
| 2 | Logo_CC_BY | -lmp-misc:Logo_CC_BY | G1, G2 |
| 2 | Logo_OSHW | -lmp-misc:Logo_OSHW | G3, G4 |
| 1 | 11K | -lmp-misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 200R | -lmp-misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 36K | -lmp-misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | 4K7 | -lmp-misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R15 |
| 1 | 51R | -lmp-misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 75K | -lmp-misc:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Conn_Eurorack_10 | -lmp-synth:IDC-Header-Eurorack-10-TH | J7 |
| 1 | Conn_PCB_Back | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Horizontal | J6 |
| 1 | Conn_PCB_Front | Connector_PinSocket_2.54mm:PinSocket_1x09_P2.54mm_Vertical | J5 |
| 1 | LED_Dual_5mm_ACA | LED_THT:LED_D5.0mm-3 | D1 |
| 1 | TL071 | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | TL074 | Package_DIP:DIP-14_W7.62mm | U1 |
More from Len42/Synth
12- 2 layers91.2 × 108.2 mm

- 2 layers101.3 × 108.2 mm

- 2 layers111.5 × 106.4 mm

- 2 layers111.3 × 108.2 mm

- 6 layers101.6 × 108.2 mm

- 2 layers111.3 × 102.6 mm

- 2 layers91.4 × 108.2 mm

- 2 layers98.5 × 89.2 mm

- 6 layers101.6 × 106.7 mm

- 2 layers95 × 108.2 mm

- 2 layers94.2 × 108.2 mm

- 2 layers15.2 × 27.9 mm

Similar boards
- 2 layers78 × 60 mm

- 2 layers115 × 14.5 mm

- 2 layers37.7 × 20 mm

- 2 layers88.9 × 88.4 mm

- 2 layers125 × 98 mm

3-in-1
mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos
44 parts258 - 2 layers65 × 56.5 mm

RPiG3iMac
qbancoffee/imac_g3_ivad_board_init
iMac G3 IVAD board initialization with an arduino
44 parts240LGPL-3.0 - 2 layers54.4 × 49.3 mm

Fx3 tn20k adapter
Stefan-Olt/MISRC
MISRC Is a multi channel RF capture device for FM RF, S-Video, CVBS RAW capture and anything else, but intended and supported for the decode family of projects vhs-decode, ld-decode, hifi-decode.
44 parts236CC-BY-4.0 - 2 layers250 × 32 mm

Questions
How big is the Mixer1 PCB?
It measures 88.8 × 108.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mixer1 use?
44 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mixer1 KiCad files?
From the Len42/Synth repository on GitHub, at the commit this page was made from: the board is modules/Mixer1/Mixer1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mixer1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Len42 before reusing the design.
