
Usb pd module cypd3177
LEDs-by-glowingkitty/Dev-Modules
A collection of development modules for electrical engineers, who work on new PCB designs.

A collection of development modules for electrical engineers, who work on new PCB designs.
Usb to serial is an open-source printed circuit board by LEDs-by-glowingkitty, from the LEDs-by-glowingkitty/Dev-Modules repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 40 × 40 mm with 13 parts on 24 nets, routed with 137 tracks and 263 vias.
Its parts include 9 ICs, 2 capacitors and 1 resistor. It belongs with the interfaces and adapters boards of this library.
A collection of development modules for electrical engineers, who work on new PCB designs.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | lib:MountingHole_3.2mm_M3 | U6, U7, U8, U9 | |
| 2 | lib:CONN-TH_10P-P2.54_MX128-2.54-10P-GN01-CU-Y-A | U4, U5 | |
| 1 | lib:QFN-24_L4.0-W4.0-P0.50-TL-EP2.6 | U3 | |
| 1 | lib:SC-70-6_L2.2-W1.3-P0.65-LS2.1-BR | U2 | |
| 1 | lib:SOT-143-4_L2.9-W1.3-P1.92-LS2.4-BL | U1 | |
| 1 | 10V 10uF X5R ±10% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | lib:C0603 | C2 |
| 1 | 16V 100nF X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | lib:C0402 | C1 |
| 1 | 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 1kΩ 0402 Chip Resistor - Surface Mount ROHS | lib:R0402 | R1 |
The 12 most common of 13 parts.

LEDs-by-glowingkitty/Dev-Modules
A collection of development modules for electrical engineers, who work on new PCB designs.

LEDs-by-glowingkitty/Dev-Modules
A collection of development modules for electrical engineers, who work on new PCB designs.

LEDs-by-glowingkitty/Dev-Modules
A collection of development modules for electrical engineers, who work on new PCB designs.

LEDs-by-glowingkitty/Dev-Modules
A collection of development modules for electrical engineers, who work on new PCB designs.

LEDs-by-glowingkitty/Dev-Modules
A collection of development modules for electrical engineers, who work on new PCB designs.

LEDs-by-glowingkitty/Dev-Modules
A collection of development modules for electrical engineers, who work on new PCB designs.

LEDs-by-glowingkitty/Dev-Modules
A collection of development modules for electrical engineers, who work on new PCB designs.

LEDs-by-glowingkitty/Dev-Modules
A collection of development modules for electrical engineers, who work on new PCB designs.

LEDs-by-glowingkitty/Dev-Modules
A collection of development modules for electrical engineers, who work on new PCB designs.



samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments


willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
It measures 40 × 40 mm and has 2 copper layers, 1.6 mm thick.
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the LEDs-by-glowingkitty/Dev-Modules repository on GitHub, at the commit this page was made from: the board is usb-to-serial/elec/layout/default/usb-to-serial.kicad_pcb and its schematic USB-C_PD_Connector/elec/layout/default/usb-c-pd-connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).