
Breadboard
Ledger-Donjon/scaffold
Donjon hardware tool for circuits security evaluation

Donjon hardware tool for circuits security evaluation
Atecc is an open-source printed circuit board by Ledger-Donjon, from the Ledger-Donjon/scaffold repository on GitHub, published under the LGPL-3.0 licence. It is a 2-layer board of 33 × 91.4 mm with 5 parts on 48 nets, routed with 43 tracks and 3 vias.
Its parts include 2 ICs and 2 connectors.
When performing hardware security evaluation of integrated circuits and embedded platforms, the first step is to setup the device to be able to automate tests, retrieve results and trigger instruments to perform measurements or inject faults. Scaffold is an electronic motherboard designed to quickly setup, instrument and test cirtcuits. The board can be controlled through USB using a Python3 API, enabling easy development of tests. All the project is Open-Hardware and Open-Source.

The FPGA architecture runs at 100 MHz and embeds many peripherals:
The board also integrates an 11X analog amplifier with 200 MHz bandwidth for power measurement. The on-board shunt resistor can be tuned from 0 to 100 Ohms.
Scaffold is able to operate from 1.5V to 3.3V devices: power supplies and I/O bank voltage can be tuned thanks to adjustable voltage regulators. Scaffold can be powered from USB or external power supplies.
Four special I/Os can generate 5V pulses, which are compatible with ALPhANOV PDM laser sources (50 Ohm TTL).
All the files required to fabricate the board are included in the repository. If you do not wish to build it yourself, you can request for quotation by sending a mail to scaffold@ledger.fr (only for Europe or USA shipping).
Python3 library can be installed using pip:
pip3 install donjon-scaffoldAPI documentation is available on Read the Docs.
Scaffold is released under GNU Lesser General Public Licence version 3 (LGPLv3). See COPYING and COPYING.LESSER for license details.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_02x10_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | J1, J2 |
| 1 | ATECC508A | mykicadlibs:FLIP-SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ATECC508A | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | DUNGEON_LOGO | mykicadlibs:donjon-2000 | LOGO1 |

Ledger-Donjon/scaffold
Donjon hardware tool for circuits security evaluation


Ledger-Donjon/scaffold
Donjon hardware tool for circuits security evaluation

Ledger-Donjon/scaffold
Donjon hardware tool for circuits security evaluation

Ledger-Donjon/scaffold
Donjon hardware tool for circuits security evaluation

Ledger-Donjon/scaffold
Donjon hardware tool for circuits security evaluation



joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.

OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
It measures 33 × 91.4 mm and has 2 copper layers, 1.6 mm thick.
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Ledger-Donjon/scaffold repository on GitHub, at the commit this page was made from: the board is daughter-boards/atecc/atecc.kicad_pcb and its schematic daughter-boards/atecc/atecc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the LGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).