Skip to the content
2 layers31.6 × 35.8 mmLEAP Power, the printed circuit board in 3D

Power Distribution for Bus-based Motors used in all LEAP Hands

Size
31.6 × 35.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
3
Pads
31
Tracks, vias
16, 0
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
13 Jun 2025
Updated
19 Jun 2025

Overview

LEAP Power is an open-source printed circuit board by leap-hand, from the leap-hand/LEAP_Power repository on GitHub. It is a 2-layer board of 31.6 × 35.8 mm with 10 parts on 3 nets, routed with 16 tracks and 0 vias.

It belongs with the robots and motor control boards of this library.

README

README.md

LEAP Power

Power Distribution for Bus-Based Motors in LEAP Hands

LEAP Hands use a large number of bus-based servos, meaning many motors need both power and signal. To simplify wiring and provide stable, clean power, we designed the LEAP Power board. While optional, this board greatly improves cable management and overall reliability.

💡 Interested in buying a board or two? I have several in stock—just email me! (Cost of item + shipping to USA is around $25.)

Dynamixel BoardFeetech Board
Dynamixel BoardFeetech Board

There are two versions of the LEAP Power board:

  • Dynamixel-compatible
  • Feetech-compatible

The PCB itself is the same for both; the difference lies in the connectors used for each motor type.

You’ll find:

  • KiCad design files in the LEAP_Power folder (for custom modification)
  • Gerber and assembly files in the export folder (ready for PCBWay or any manufacturer)

Ordering Notes

When uploading the files to PCBWay (or similar services), be sure to select 10oz copper. This is essential due to the high current draw of the servos.

  • Note: 10oz copper increases the cost (~$15+ per board) and the Minimum Order Quantity is higher than typical PCBs
Assembly InstrPCB Instructions

DIY Assembly Option

Prefer to assemble it yourself? You can! Just order the bare PCB and source the components below:

Power Connector:

Motor Connectors:

⚠️ Soldering Tip: Due to the heavy copper, soldering may be more challenging than usual. Use a high-power iron or preheat the board for best results.


Questions?

Feel free to reach out with any questions or feedback. I'm happy to help!

Parts

10
QtyValueFootprintReferences
9Conn_01x03_Pinlibary_for_leap_power:CONN3_B3B-EH-ALFSN_JSTJ2, J3, J4, J5, J6, J7, J8, J9, J10
1Conn_01x02_Pinlibary_for_leap_power:AMASS_XT30PW-M_1x02_P2.50mm_HorizontalJ1

Similar boards

  • 2 layers57 × 55.2 mmLogicAnalyzer, the printed circuit board in 3D

    LogicAnalyzer

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    10 parts5.1kGPL-3.0
  • 2 layers32.2 × 15.4 mmProtector, the printed circuit board in 3D

    Protector

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    10 parts4.3kMIT
  • 2 layers26 × 18 mmConn, the printed circuit board in 3D

    Conn

    yaqwsx/KiKit

    Automation tools for KiCAD

    10 parts2.1kMIT
  • 2 layers44.3 × 30.5 mmLime2-SATA RevA, the printed circuit board in 3D

    Lime2-SATA RevA

    OLIMEX/OLINUXINO

    OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C

    10 parts1.5k
  • 2 layers17.8 × 43.2 mmNano Adapter, the printed circuit board in 3D

    Nano Adapter

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    10 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    10 parts1kGPL-3.0

Questions

How big is the LEAP Power PCB?

It measures 31.6 × 35.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LEAP Power use?

10 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LEAP Power KiCad files?

From the leap-hand/LEAP_Power repository on GitHub, at the commit this page was made from: the board is LEAP_Power/LEAP_Power.kicad_pcb and its schematic LEAP_Power/LEAP_Power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LEAP Power design in my own project?

Its repository states no licence, so its author keeps all rights: ask leap-hand before reusing the design.