
Bentoboard
torbers/bentoboard
as many ready-to-use electronics as i could fit on a 4"x4" PCB.

an RP2040 devboard made by me
Vejas pi is an open-source printed circuit board by Las-Vejas, from the Las-Vejas/Vejas2040 repository on GitHub. It is a 2-layer board of 21 × 51 mm with 38 parts on 64 nets, routed with 643 tracks and 52 vias.
It is built around the RP2040, W25Q128JVSIQ and LIS3DH, with the WS2812B-2020 among its other parts. Its parts include 18 capacitors, 8 resistors, 4 ICs, 3 connectors and 2 switches. It belongs with the microcontroller boards boards and the RP2040 boards of this library.
an RP2040 devboard made by me
What it includes:
Here are some images of the board (3d files):
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3, C4, C5, C6, C7, C8, C9, C11, C12, C17, C18 |
| 3 | 1K | Resistor_SMD:R_0402_1005Metric | R5, R7, R8 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C13, C14 |
| 2 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C10 |
| 2 | 27.4 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 33pF | Capacitor_SMD:C_0402_1005Metric | C15, C16 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | Conn_01x20_Pin | Connector_PinHeader_2.54mm:PinHeader_1x20_P2.54mm_Vertical | J2, J3 |
| 2 | SW_Push | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | LIS3DH | Package_LGA:LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U2 |
| 1 | LOGO | LOGO | G*** |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U4 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_JAE_DX07S016JA1R1500 | J1 |
| 1 | W25Q128JVS | Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U3 |
| 1 | WS2812B-2020 | LED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mm | D2 |

torbers/bentoboard
as many ready-to-use electronics as i could fit on a 4"x4" PCB.


anayvaidya11/Archiater
KiCad 10.0.4 design for the Archiater wrist-unit sensor hub — the custom board referenced throughout the docs. This is the real design source, committed so the "custom PCB" claim is backed by files you can open, not…

chatelao/xDuinoRail-Decoder
The friendly decoder development plattform for model railroad tinkers.

mitmedialab/generic-pan-tilt-pcb
Generic Pan Tilt PCB sources

khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries

dededecline/Gridiron
Gridiron keyboard designed by me. All files for production are inside this repository.

It measures 21 × 51 mm and has 2 copper layers, 1.6 mm thick.
38 parts, built around the RP2040, W25Q128JVSIQ, LIS3DH and WS2812B-2020. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Las-Vejas/Vejas2040 repository on GitHub, at the commit this page was made from: the board is vejas-pi/vejas-pi.kicad_pcb and its schematic vejas-pi/vejas-pi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Las-Vejas before reusing the design.