
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

Keebxpansion is an open-source printed circuit board by Las-Vejas, from the Las-Vejas/keebxpansion repository on GitHub. It is a 2-layer board of 32 × 25.5 mm with 12 parts on 17 nets, routed with 35 tracks and 11 vias.
Its parts include 5 resistors, 3 diodes, 1 connector and 1 switch.
This is an expansion module for the Hackxpansion Console. This module features 3 LEDs and one hotswappable MX switch. The module is intended to be used for clicker games like flappy bird or Dino run. The switch is on GPIO 0 and the LEDs are on GPIOs 1 to 3.
![]() | ![]() |
|---|---|
![]() | ![]() |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 33 | Resistor_SMD:R_0402_1005Metric | R3, R4, R5 |
| 3 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3 |
| 1 | 1k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 9k1 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | SW_Push | ScottoKeeps_Hotswap:Hotswap_MX_Plated_1.00u | SW1 |
| 1 | ~ | Hackxpansion:Male_Module | J1 |
The 10 most common of 12 parts.

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 32 × 25.5 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Las-Vejas/keebxpansion repository on GitHub, at the commit this page was made from: the board is pcb/keebxpansion.kicad_pcb and its schematic pcb/keebxpansion.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Las-Vejas before reusing the design.