
Head
lapalmaelettronica/Progetti
Una lista dei progetti che ho pubblicato su instagram, potete trovarci pcb, codici, schemo elettrici e stampe 3d!

Una lista dei progetti che ho pubblicato su instagram, potete trovarci pcb, codici, schemo elettrici e stampe 3d!
Breakout board GPT E is an open-source printed circuit board by lapalmaelettronica, from the lapalmaelettronica/Progetti repository on GitHub. It is a 4-layer board of 131.5 × 83.5 mm with 118 parts on 45 nets, routed with 182 tracks and 172 vias.
It is built around the LM393, IRF7416TRPBF and BC337, with the FDD4141, SMBJ14A and SMBJ6.0A among its other parts. Its parts include 33 capacitors, 25 resistors, 10 diodes, 9 connectors and 8 transistors. It belongs with the interfaces and adapters and microcontroller boards boards of this library.
Una lista dei progetti che ho pubblicato su instagram, potete trovarci pcb, codici, schemi elettrici e stampe 3d!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP_GND1, TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TPref1, TPvmicro1 |
| 9 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6, C14, C18, C19, C20, C22, C24 |
| 8 | C | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C2, C3, C15, C17, C21, C25, C27, C28 |
| 6 | 10K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R17, R18, R19, R20, R21, R22 |
| 6 | IRF7416TRPBF | Packages:SOIC-8 | Q1, Q4, Q5, Q6, Q7, Q8 |
| 5 | LED | LED_THT:LED_D4.0mm | D1, D2, D8, D9, D10 |
| 4 | 10k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R12, Rb1, Rb2, Rb5 |
| 4 | C_Polarized | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1, C26, C29, C30 |
| 4 | Conn_02x04_Counter_Clockwise | Connector_Molex:Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical | J1, J6, J8, J9 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 4 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R13, R14, R15 |
| 4 | ~ | LIB_Personale:MP1584EN | U1, U5, U6, U7 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10, C32, C33 |
| 2 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R5 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13 |
| 2 | 470u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | CBulk1, CBulk2 |
| 2 | 820 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R6 |
| 2 | Conn_02x02_Counter_Clockwise | Connector_Molex:Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical | J2, J4 |
| 1 | 0.1u | Capacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mm | C31 |
| 1 | 1.1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | Rf1 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R8 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C23 |
| 1 | 105k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R9 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 15k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | Rb6 |
| 1 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R16 |
| 1 | 2.2k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R10 |
| 1 | 2.7nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C9 |
| 1 | 22u | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C7 |
| 1 | 3.3k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | Rs1 |
| 1 | 31k6 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | Rb3 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11 |
| 1 | 4.7uH | Inductor_SMD:L_Changjiang_FXL0630 | L1 |
| 1 | 470 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | 470uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C16 |
| 1 | 47k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | 51k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | Rb4 |
| 1 | 53.6k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11 |
| 1 | 820k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | Rf2 |
| 1 | AP64501SP-13 | LIB_Personale:AP64501SP-13 | U4 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92L_HandSolder | Q3 |
| 1 | Conn_02x02_Counter_Clockwise | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J3 |
| 1 | FDD4141 | LIB_Personale:FDD4141-TO252 | Q2 |
| 1 | Fan | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Fuse_Small | Fuse:Fuseholder_Littelfuse_Nano2_154x | F2 |
| 1 | LED_alert | LED_THT:LED_D4.0mm | D4 |
| 1 | LED_cutoff | LED_THT:LED_D4.0mm | D3 |
| 1 | LED_on | LED_THT:LED_D4.0mm | D5 |
| 1 | LM393 | Package_DIP:DIP-8_W7.62mm | U3 |
| 1 | Raspberry pi 4/5 | TerminalBlock_TE-Connectivity:TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J5 |
| 1 | SMBJ14A | Diode_SMD:D_SMB_Handsoldering | D6 |
| 1 | SMBJ6.0A | Diode_SMD:D_SMB_Handsoldering | D7 |
| 1 | SW_DIP_x06 | Button_Switch_THT:SW_DIP_SPSTx06_Slide_6.7x16.8mm_W7.62mm_P2.54mm_LowProfile | SW1 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-23-3 | U2 |

lapalmaelettronica/Progetti
Una lista dei progetti che ho pubblicato su instagram, potete trovarci pcb, codici, schemo elettrici e stampe 3d!

lapalmaelettronica/Progetti
Una lista dei progetti che ho pubblicato su instagram, potete trovarci pcb, codici, schemo elettrici e stampe 3d!

lapalmaelettronica/Progetti
Una lista dei progetti che ho pubblicato su instagram, potete trovarci pcb, codici, schemo elettrici e stampe 3d!

lapalmaelettronica/Progetti
Una lista dei progetti che ho pubblicato su instagram, potete trovarci pcb, codici, schemo elettrici e stampe 3d!

lapalmaelettronica/Progetti
Una lista dei progetti che ho pubblicato su instagram, potete trovarci pcb, codici, schemo elettrici e stampe 3d!

lapalmaelettronica/Progetti
Una lista dei progetti che ho pubblicato su instagram, potete trovarci pcb, codici, schemo elettrici e stampe 3d!

lapalmaelettronica/Progetti
Una lista dei progetti che ho pubblicato su instagram, potete trovarci pcb, codici, schemo elettrici e stampe 3d!





engelberd/sensor-system
Working notes for the first custom RP2350A board with ADXL355, USB-C development power/data, 12 V field input, RS485, and a power architecture biased toward a clean accelerometer supply.

pulikantitarun/redcat51ii-automated-flat-panel
Automated flat panel controller, PCB, firmware, and 3D-printable hardware for the William Optics RedCat 51 II and ASIAIR Plus

beaked99/air-scales
2025-11-20. Updated all the footprints and symbols to their proper layouts. no more fkn errors. Hallefuckinglujah. Fucked up with LM74610 not using the right footprint. minor fix. 2025-11-16.

It measures 131.5 × 83.5 mm and has 4 copper layers, 1.6 mm thick.
118 parts, built around the LM393, IRF7416TRPBF, BC337 and FDD4141. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lapalmaelettronica/Progetti repository on GitHub, at the commit this page was made from: the board is GPT-E/Schede HW/Files/Breakout board GPT-E/Breakout board GPT-E.kicad_pcb and its schematic GPT-E/Schede HW/Files/BatteryManagmentGPT-E/BatteryManagmentGPT-E.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask lapalmaelettronica before reusing the design.