
Controller
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

Voron V0 / V0.1 Umbilical remix for klicky probe
Toolhead PCB is an open-source printed circuit board by lambcd15, from the lambcd15/V0-Umbilical-Klicky repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 50 × 30.2 mm with 11 parts on 16 nets, routed with 84 tracks and 1 via.
It belongs with the sensors and measurement boards of this library.
Voron V0 / V0.1 Umbilical remix for klicky probe
This is remix of timmit99 Umbilical cable mod for the Voron V0.1, I have chanegd the design to add in the z-end stop of klicky probe function as I want a clean look, I may later add the I2C wiring for the ADXL345 for input shaping.
The bill of materials is the same as timmit99 but with a 16 pin Molex not a 14 pin.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 2 | Part Cooling Fan | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J4, J8 |
| 1 | Conn_02x08_Top_Bottom | Connector_Molex:Molex_Micro-Fit_3.0_43045-1600_2x08_P3.00mm_Horizontal | J1 |
| 1 | Heater | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Hotend Fan | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | Motor | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Thermistor | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | X-Endstop | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | Z-Endstop | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J9 |

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards


FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

basilfx/TRADFRI-Hacking
Hacking IKEA TRÅDFRI products, such as light bulbs, window blinds and other accessories.
It measures 50 × 30.2 mm and has 2 copper layers, 1.6 mm thick.
11 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the lambcd15/V0-Umbilical-Klicky repository on GitHub, at the commit this page was made from: the board is Toolhead_PCB/Toolhead_PCB.kicad_pcb and its schematic Frame_PCB/V0-UmbilicalBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).