Skip to the content
2 layers98.8 × 46.7 mmRam-32-word, the printed circuit board in 3D

A place for info and code relating to my electronics projects

Size
98.8 × 46.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
63
Pads
161
Tracks, vias
434, 15
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
19 Oct 2019
Updated
8 Jan 2022

Overview

Ram-32-word is an open-source printed circuit board by lafehubert, from the lafehubert/electronics repository on GitHub. It is a 2-layer board of 98.8 × 46.7 mm with 32 parts on 63 nets, routed with 434 tracks and 15 vias.

Its parts include 10 resistors, 10 diodes, 4 capacitors, 4 ICs and 4 connectors. It belongs with the FPGA and CPLD boards of this library.

README

ya4b/slow-clock/README.md

This slow clock was initially inspired by Ben Eater's design (https://eater.net/8bit/clock) but I found the 555 to be too fiddly for the monostable stage, and overkill for the bistable stage, so I used a 74LS123 for the former and an R-S latch made from a couple of NANDs on a 74LS00 for the latter. I also replaced the 74LS04 with a 74LS14 which seemed to clean up the waveform a good bit.

Parts

32
QtyValueFootprintReferences
10330 ΩResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2, R3, R4, R5, R6, R7, R8, R9, R10
10LEDLED_THT:LED_Rectangular_W5.0mm_H2.0mmD1, D2, D3, D4, D5, D6, D7, D8, D9, D10
40.1 µFCapacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mmC1, C2, C3, C4
3Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1, J2, J3
274LS219Package_DIP:DIP-16_W7.62mm_SocketU3, U4
174LS243Package_DIP:DIP-14_W7.62mm_SocketU1
1Conn_01x38Connector_PinHeader_2.54mm:PinHeader_1x38_P2.54mm_VerticalJ4
1GAL16V8Package_DIP:DIP-20_W7.62mm_SocketU2

More from lafehubert/electronics

6
  • 2 layersYa4b alu, the printed circuit board in 3D

    Ya4b alu

    lafehubert/electronics

    A place for info and code relating to my electronics projects

    133 parts
  • 4 layers114.3 × 90.3 mmAddress register bank, the printed circuit board in 3D

    Address register bank

    lafehubert/electronics

    A place for info and code relating to my electronics projects

    99 parts
  • 4 layers100.2 × 81.9 mmYa4b alu, the printed circuit board in 3D

    Ya4b alu

    lafehubert/electronics

    A place for info and code relating to my electronics projects

    82 parts
  • 4 layers99.6 × 59.1 mmData register bank, the printed circuit board in 3D

    Data register bank

    lafehubert/electronics

    A place for info and code relating to my electronics projects

    57 parts
  • 2 layers99.5 × 49.7 mmTransfer register board, the printed circuit board in 3D

    Transfer register board

    lafehubert/electronics

    A place for info and code relating to my electronics projects

    40 parts
  • 2 layers83.6 × 45.1 mmSlow clock, the printed circuit board in 3D

    Slow clock

    lafehubert/electronics

    A place for info and code relating to my electronics projects

    26 parts

Similar boards

  • 2 layers50 × 23.2 mmAnalog, the printed circuit board in 3D

    Analog

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    32 parts1kGPL-3.0
  • 2 layers136.8 × 54.2 mmRetropie zero, the printed circuit board in 3D

    Retropie zero

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    32 parts915
  • 2 layersMooltipass top, the printed circuit board in 3D

    Mooltipass top

    limpkin/mooltipass

    Github repository dedicated to the mooltipass project

    32 parts531
  • 2 layers16 × 20 mmESPKey, the printed circuit board in 3D

    ESPKey

    octosavvi/ESPKey

    Wiegand data logger, replay device and micro door-controller

    32 parts353GPL-2.0
  • 2 layers82 × 40.9 mmDisplay7447, the printed circuit board in 3D

    Display7447

    zmaker/arduino_cookbook

    gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

    32 parts269
  • 2 layers40 × 38 mmShield, the printed circuit board in 3D

    Shield

    murexrobotics/electrical

    Highly integrated electronics design and printed circuit boards (PCBs) for the MATE ROV Competition. Attempt the impossible.

    32 parts192MIT
  • 2 layers47 × 39 mmQrss clock tx, the printed circuit board in 3D

    Qrss clock tx

    swharden/AVR-projects

    A collection of standalone AVR projects written in C

    32 parts184MIT
  • 2 layers30.9 × 63 mmStm32-io extend, the printed circuit board in 3D

    Stm32-io extend

    hardenedlinux/cheap-pcb

    Cheap PCB: Better understanding the current status of hardware supply chain

    32 parts170CC0-1.0

Questions

How big is the Ram-32-word PCB?

It measures 98.8 × 46.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Ram-32-word use?

32 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Ram-32-word KiCad files?

From the lafehubert/electronics repository on GitHub, at the commit this page was made from: the board is ya4b/ram-32-word/ram-32-word.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Ram-32-word design in my own project?

Its repository states no licence, so its author keeps all rights: ask lafehubert before reusing the design.