Skip to the content
2 layers38.1 × 21 mmTwpatron v2, the printed circuit board in 3D

Open source quantum amplifier test platform with built in E-Cal

Size
38.1 × 21 mm
Copper layers
2
Thickness
0.6 mm
Parts
12
Nets
17
Pads
78
Tracks, vias
32, 76
Pours
56
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
20 Mar 2026
Updated
27 Mar 2026

Overview

Twpatron v2 is an open-source printed circuit board by lafefspietz, from the lafefspietz/twpatron repository on GitHub, published under the CC0-1.0 licence. It is a 2-layer board of 38.1 × 21 mm with 12 parts on 17 nets, routed with 32 tracks and 76 vias.

Its parts include 4 ICs, 3 connectors and 1 resistor. It belongs with the audio and music boards of this library.

README

README.md

Parts

12
QtyValueFootprintReferences
4, , ,
4CommentMM5800:MM5800U1, U2, U3, U4
2Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1, J6
1R_USResistor_SMD:R_0201_0603MetricR1
1SMP-straight-19S141-40ML5molex-smp:jaws-molex-CONN_73415-3310_MOLJ3

Similar boards

  • 2 layersNrf bga, the printed circuit board in 3D

    Nrf bga

    github-linguist/linguist

    Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

    12 parts14kMIT
  • 2 layers66.9 × 74.5 mmDeskHop, the printed circuit board in 3D

    DeskHop

    hrvach/deskhop

    Fast Desktop Switching Device

    12 parts7.9kGPL-3.0
  • 2 layers40 × 15 mmSensors, the printed circuit board in 3D

    Sensors

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    12 parts3kApache-2.0
  • 2 layers42.7 × 56.5 mmTle6240 driver, the printed circuit board in 3D

    Tle6240 driver

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    12 parts1.2k
  • 2 layers49 × 25 mm5v boost regulator, the printed circuit board in 3D

    5v boost regulator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    12 parts915
  • 2 layers28.3 × 10.3 mmTap Photosensor PCB, the printed circuit board in 3D

    Tap Photosensor PCB

    VoronDesign/Voron-Tap

    Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

    12 parts716GPL-3.0
  • 2 layers25.4 × 70.4 mmTpmsniffer, the printed circuit board in 3D

    Tpmsniffer

    stacksmashing/pico-tpmsniffer

    A simple, very experimental TPM sniffer for LPC bus

    12 parts696

Questions

How big is the Twpatron v2 PCB?

It measures 38.1 × 21 mm and has 2 copper layers, 0.6 mm thick.

What parts does the Twpatron v2 use?

12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Twpatron v2 KiCad files?

From the lafefspietz/twpatron repository on GitHub, at the commit this page was made from: the board is twpatron-v2.kicad_pcb and its schematic twpatron-v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Twpatron v2 design in my own project?

Its repository publishes it under the CC0-1.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).