2 layers57.2 × 53 mm
2 layers
A library of tiny interconnectable modules to create electronics system.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 7
- Pads
- 20
- Tracks, vias
- 24, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 7 Nov 2016
- Updated
- 23 Nov 2016
Overview
Mosfet is an open-source printed circuit board by LabStorm, from the LabStorm/easy-modular-electronics repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 9 parts on 7 nets, routed with 24 tracks and 0 vias.
It is built around the BC547 and IRF540N. Its parts include 4 connectors, 2 resistors, 2 transistors and 1 diode.
Main components
2README
README.mdeasy-modular-electronics
A library of tiny interconnectable modules to create electronics systems. A module consists of a small electronic circuit with a single-purpose (for example, a voltage stabilizer, an instrumentation amplifier or a PIR sensor.
Modules
The 'modules/template' folder contains (TO DO) a template which can be used as a starting point to create new modules.
Mechanical/Electrical Specs
TO DO
Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | CONN_01X02 | Pin_Headers:Pin_Header_Angled_1x02 | P1, P2, P3, P4 |
| 2 | R | Resistors_ThroughHole:Resistor_Horizontal_RM7mm | R1, R2 |
| 1 | BC547 | TO_SOT_Packages_THT:TO-92_Molded_Narrow | Q1 |
| 1 | D | Diodes_ThroughHole:Diode_DO-35_SOD27_Horizontal_RM10 | D1 |
| 1 | IRF540N | TO_SOT_Packages_THT:TO-220_Neutral123_Vertical_LargePads | Q2 |
Questions
What parts does the Mosfet use?
9 parts, built around the BC547 and IRF540N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mosfet KiCad files?
From the LabStorm/easy-modular-electronics repository on GitHub, at the commit this page was made from: the board is modules/mosfet/kicad/mosfet.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mosfet design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers131 × 66 mm
Awas pt2
404notfound-han/PCB-Awwaz
Sistem IoT kendali otomatisasi katup air Solenoid 12V berbasis ESP32. Desain PCB mandiri menggunakan driver internal MOSFET IRF540N horizontal, proteksi flyback diode 1N4007, dan sirkuit penurun tegangan step-down…
21 parts - 2 layers155 × 70.1 mm
4S BMS Arduino Shield autor
Aassimrepo/4S-BMS-Proteus-KiCad
Simulation and PCB design of a 4S Battery Management System using Proteus, Arduino and KiCad.
69 parts - 2 layers72 × 33 mm
Positive Battery Charger Circuit
AbhishekGM23/PCB-Design
This repository contains various PCB design projects.
36 parts - 2 layers254.1 × 139.2 mm
- 2 layers83.7 × 90.3 mm
Incubator Quetta Client
manhoosbilli1/Incubator_basic_esp32_modular_1_sided
This contains an incubator pcb i've made for a client. his needs were specific so only added what he needed. a complete and complex version can be found in capibator organization.
43 parts - 2 layers95.2 × 63.7 mm
Opentribhw
nurbano/opentribhw
Este proyecto presenta una plataforma abierta y de bajo costo para la instrumentación, medición y control en ensayos tribológicos de tipo Pin-on-Disk y Block-on-Ring.
38 parts - 2 layers47 × 49.5 mm
