

Volume knob
The idea of this project is to create a simple knob with media controls.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 42
- Pads
- 184
- Tracks, vias
- 233, 8
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Feb 2025
- Updated
- 19 Feb 2025
Overview
Volume knob is an open-source printed circuit board by l-donovan, from the l-donovan/volume-knob repository on GitHub. It is a 2-layer board with 35 parts on 42 nets, routed with 233 tracks and 8 vias.
It is built around the ESP32-C6-WROOM-1-N8 and LESD5D5.0CT1G. Its parts include 12 capacitors, 12 resistors, 5 diodes, 3 switches and 2 ICs. It belongs with the ESP32 and RISC-V boards of this library.
Main components
2ESP32-C6-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -99.2dBm 2.4GHz 20.5dBm 382mA 3V~3.6V 78mA ESP32-C6 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesLESD5D5.0CT1G
SOD-523-55℃~+150℃ 100W 12pF 16V 1uA 5V 7A 7V Bidirectional ESD IEC 61000-4-2 SOD-523 ESD and Surge Protection (TVS/ESD) ROHSGOODWORKUncategorised
README
README.mdvolume-knob
The idea of this project is to create a simple knob with media controls.
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | Capacitor_SMD:C_0201_0603Metric | C3, C6, C7, C10, C11 |
| 4 | 10K | Resistor_SMD:R_01005_0402Metric | R1, R2, R6, R11 |
| 4 | 10uF | Capacitor_SMD:C_0201_0603Metric | C2, C4, C5, C8 |
| 4 | R_US | Resistor_SMD:R_01005_0402Metric | R7, R8, R9, R10 |
| 3 | 5.1K | Resistor_SMD:R_01005_0402Metric | R3, R4, R5 |
| 3 | LESD5D5.0CT1G | resources:TVS_LESD5D5.0CT1G | D2, D3, D4 |
| 2 | C | Capacitor_SMD:C_0201_0603Metric | C9, C12 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2, SW3 |
| 1 | 1uF | Capacitor_SMD:C_0201_0603Metric | C1 |
| 1 | 3.3K | Resistor_SMD:R_01005_0402Metric | R12 |
| 1 | D | Diode_SMD:D_0201_0603Metric | D1 |
| 1 | ESP32-C6-WROOM-1 | PCM_Espressif:ESP32-C6-WROOM-1 | U1 |
| 1 | LED | LED_SMD:LED_0201_0603Metric | D5 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SGM2212-3.3XKC3G_TR | resources:SOT230P700X180-4N | IC1 |
| 1 | USB_C_Receptacle | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Similar boards
- 4 layers45 × 30 mm

- 6 layers90 × 90 mm

SolarDataLogger
brokebit/SolarDataLogger
Firmware for custom data logger for Victron MPPT charge controllers via the Ve.Direct port/protocol.
70 partsCC0-1.0 - 2 layers143 × 86.9 mm

- 4 layers145.4 × 99.1 mm

Esp32 xiaozhi
siliconvalleyar-oss/esp32_xiazhi_pcb
Repositorio del diseño PCB para el dispositivo XiaoZhi, una estación de desarrollo y asistente de voz de código abierto basado en el ESP32-C6.
235 parts - 2 layers69.4 × 113 mm

- 2 layers64 × 50 mm

EverAliveSensor PCB
jfm92/everAliveSensor
Solar-powered BLE environmental sensor (temp, humidity, pressure) with a 50F supercapacitor — potentially infinite lifetime, 19-day dark autonomy. ESP32 + BME680. Experimental.
54 parts28 - 2 layers62.4 × 113.8 mm

- 2 layers99.9 × 40 mm

Questions
What parts does the Volume knob use?
35 parts, built around the ESP32-C6-WROOM-1-N8 and LESD5D5.0CT1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Volume knob KiCad files?
From the l-donovan/volume-knob repository on GitHub, at the commit this page was made from: the board is design/volume-knob.kicad_pcb and its schematic design/volume-knob.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Volume knob design in my own project?
Its repository states no licence, so its author keeps all rights: ask l-donovan before reusing the design.