Skip to the content
2 layers158 × 114.7 mmSpacetime, the printed circuit board in 3D

The Ergo Little Guy - A small split-design keyboard

Size
158 × 114.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
74
Nets
47
Pads
430
Tracks, vias
607, 4
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
5 May 2019
Updated
18 May 2019

Overview

Spacetime is an open-source printed circuit board by kyleterry, from the kyleterry/spacetime-keyboard repository on GitHub. It is a 2-layer board of 158 × 114.7 mm with 74 parts on 47 nets, routed with 607 tracks and 4 vias.

Its parts include 25 diodes, 25 switches, 8 connectors and 1 IC. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

README

README.md

Spacetime Keyboard

The Spacetime is a ~36% split ortho-linear keyboard based on the Half n Half, ErgoDox and Helix. It has a tripple thumb cluster and an optional palm key. The palm key can be broken off and not used at all if you don't want it.

Currently being shipped some prototypes and I will probably have some bugs to work out. After that I will need to add more silk screen and I need to create jumper pads to support the OLED that can go over the microcontroller.

Parts

74
QtyValueFootprintReferences
25Dkeyboard_parts:D_SOD123_axialD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9
23KEYSWKeebio-Parts:MX_PCB_100H_DUAL_HOLEK1, K2, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23 +7
3CONN_02Connectors:1X02J1, J7, J7
2KEYSWKeebio-Parts:MX_PCB_200V_DUAL_HOLESK24, K25
2RESET BTNButton_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJreset, reset
2TRRSConnectors:AUDIO_JACK_3.5MM_TRRS_SMD_RAJ3, J3
1Aesthetics:OSHW-LOGO-S
1B6Connectors:1X01J8
1CONN_03Connectors:1X03J4
1ProMicro-reversiblepromicro:ProMicro-reversibleU1
1RGB DConnectors:1X01J2

The 62 most common of 74 parts.

More from kyleterry/spacetime-keyboard

2
  • 2 layers158 × 110.4 mmSpacetime rev2, the printed circuit board in 3D

    Spacetime rev2

    kyleterry/spacetime-keyboard

    The Ergo Little Guy - A small split-design keyboard

    91 parts1
  • 2 layers160.9 × 115.4 mmErgl, the printed circuit board in 3D

    Ergl

    kyleterry/spacetime-keyboard

    The Ergo Little Guy - A small split-design keyboard

    62 parts1

Similar boards

  • 2 layers141.1 × 126.8 mmCalculator, the printed circuit board in 3D

    Calculator

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    74 parts915
  • 2 layers49 × 44 mmSimple keeb reuser, the printed circuit board in 3D

    Simple keeb reuser

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    74 parts253GPL-3.0
  • 2 layers49 × 49 mmOSBMS Balancer Rev1 sot323, the printed circuit board in 3D

    OSBMS Balancer Rev1 sot323

    Teslafly/Dead-OpenBMS-dead

    A scalable, open source battery management system

    74 parts248
  • 2 layers72.4 × 72.4 mmSerialResonantFilter, the printed circuit board in 3D

    SerialResonantFilter

    profdc9/RFBitBanger

    A QRP digital transceiver created from readily available parts for off-the-grid maintenance

    74 parts222
  • 2 layers58 × 65 mmSidechain mixer core, the printed circuit board in 3D

    Sidechain mixer core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    74 parts222
  • 2 layers110 × 60 mmArduino Spot Welder, the printed circuit board in 3D

    Arduino Spot Welder

    KaeptnBalu/Arduino_Spot_Welder_V3

    This is the Kicad project for V3.1 The Arduino Board was not changed, only the Mosfet Board got a updgrade.

    74 parts207GPL-3.0
  • 2 layers51.5 × 89 mmMobo, the printed circuit board in 3D

    Mobo

    opulo-inc/feeder

    Source for LumenPnP Feeders

    74 parts202
  • 2 layers165.7 × 152.4 mm8-Bit CPU 32k, the printed circuit board in 3D

    8-Bit CPU 32k

    slu4coder/Minimal-UART-Computer-1-2

    Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed

    74 parts184

Questions

How big is the Spacetime PCB?

It measures 158 × 114.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Spacetime use?

74 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Spacetime KiCad files?

From the kyleterry/spacetime-keyboard repository on GitHub, at the commit this page was made from: the board is spacetime.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Spacetime design in my own project?

Its repository states no licence, so its author keeps all rights: ask kyleterry before reusing the design.