
Keyboard
kylechiu3201/Custom-Split-Keyboard
Custom row-staggered split keyboard with additional 'Y' and 'B' keys on the left side of the split and angled space keys.

Custom row-staggered split keyboard with additional 'Y' and 'B' keys on the left side of the split and angled space keys.
Keyboard is an open-source printed circuit board by kylechiu3201, from the kylechiu3201/Custom-Split-Keyboard repository on GitHub. It is a 2-layer board of 477.7 × 166.3 mm with 106 parts on 74 nets, routed with 418 tracks and 16 vias.
It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 52 | D | keyboard_parts:D_SOD123_axial | D_0, D_6, D_7, D_8, D_9, D_ALT1, D_B1, D_BACKSPACE1, D_BSLSH1, D_CBRAC1, D_COMMA1, D_CTRL1, D_DELETE1, D_DOT1, D_DOWN1, D_END1 +36 |
| 47 | KEYSW | MX_Alps_Hybrid_3:MXOnly-1U-Hotswap | K_0, K_6, K_7, K_8, K_9, K_ALT1, K_B1, K_CBRAC1, K_COMMA1, K_CTRL1, K_DELETE1, K_DOT1, K_DOWN1, K_END1, K_EQUAL1, K_F10 +31 |
| 2 | KEYSW | MX_Alps_Hybrid_3:MXOnly-2.25U-Hotswap | K_ENTER1, K_SPACE1 |
| 1 | Arduino_Pro_Micro | ScottoKeebs_MCU:Arduino_Pro_Micro | U1 |
| 1 | KEYSW | MX_Alps_Hybrid_3:MXOnly-1.5U-Hotswap | K_BSLSH1 |
| 1 | KEYSW | MX_Alps_Hybrid_3:MXOnly-2U-Hotswap | K_BACKSPACE1 |
| 1 | KEYSW | MX_Alps_Hybrid_3:MXOnly-1.75U-Hotswap | K_SHIFT1 |
| 1 | TRRS | ScottoKeebs_Components:TRRS_PJ-320A | U2 |

kylechiu3201/Custom-Split-Keyboard
Custom row-staggered split keyboard with additional 'Y' and 'B' keys on the left side of the split and angled space keys.

pcbreflux/espressif
all espressif stuff will committed here

baldengineer/bit-preserve
Project for capturing vintage, classic, aka old computer schematics in KiCad.

ToyotaInfoTech/RAMN
RAMN (Resistant Automotive Miniature Network), a miniature CAN/CAN-FD testbed of 4 Electronic Control Units.

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
/Revision%201.5%20(Expanded)/KiCAD/8-Bit%20CPU%2032k.kicad_pcb.jpg?size=s&soon)
slu4coder/Minimal-UART-Computer-1-2
Legacy: Version 1 and 2 of my TTL-only CPU featuring UART I/O, an expansion port, 512KB SSD at up to 10MHz clock speed


Spaceboards/SpaceboardsHardware
A collection of open source hardware that has been designed by Spaceboards

LouWii/ErgoMax
Custom ergo split keyboard project, based on ErgoDox, with hot swap sockets
It measures 477.7 × 166.3 mm and has 2 copper layers, 1.6 mm thick.
106 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the kylechiu3201/Custom-Split-Keyboard repository on GitHub, at the commit this page was made from: the board is right-keyboard-kicad-project/keyboard.kicad_pcb and its schematic left-keyboard-kicad-project/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask kylechiu3201 before reusing the design.