

FireFlyV3 0
PCB for the FireFly LED Controller
- Size
- 75 × 22 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 93
- Pads
- 322
- Tracks, vias
- 882, 124
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 May 2022
- Updated
- 15 Aug 2025
Overview
FireFlyV3 0 is an open-source printed circuit board by kylaro, from the kylaro/firefly-led-controller repository on GitHub. It is a 4-layer board of 75 × 22 mm with 61 parts on 93 nets, routed with 882 tracks and 124 vias.
It is built around the ESP32-C3FH4, RP2040 and W25Q128JVSIQ, with the AMS1117-3.3, USB-TYPE-C-018 and LMD4737T263-OY1 among its other parts. Its parts include 25 capacitors, 15 resistors, 4 ICs, 4 switches and 3 diodes. It belongs with the ESP32, RP2040 and RISC-V boards of this library.
Main components
8ESP32-C3FH4
QFN-32-EP(5x5)160MHz 32 Bit 3V~3.6V 400KB RISC-V Watchdog reset、Software reset、Built-in general-purpose timer、Programmable watchdog、Built-in temperature sensor、True random number generator (TRNG)、Storage encryption、Infrared remote control QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSEspressif SystemsMicrocontrollers (MCU/MPU/SOC)RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSB-TYPE-C-018
SMD-25℃~+85℃ 1 10000 times 16P 3A 5V 7.35mm Female Surface Mount, Right Angle Type-C SMD USB Connectors ROHSDEALONUSB ConnectorsLMD4737T263-OY1
SMD-6P,4.7x3.8mm-26dB -40℃~+100℃ 1.25mm 1.6V~3.6V 3.76mm 4.72mm 57dB 750uA Omnidirectional Omnidirectional pickup SMD-6P,4.7x3.8mm MEMS Microphones ROHSLinkMemsMEMS MicrophonesRFANT3216120A5T
1206-40℃~+85℃ 1.2mm 1.55mm 1.6mm 100MHz 2 2.4GHz 2dBi 3.2mm 1206 Antennas ROHSWalsin TechnologyAntennasSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4, C5, C9, C10, C12, C13, C14, C16, C20, C24, C26 |
| 4 | 10K | Resistor_SMD:R_0402_1005Metric | R2, R9, R15, R16 |
| 4 | 22R | Resistor_SMD:R_0402_1005Metric | R1, R5, R11, R13 |
| 4 | BTN | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2, SW3, SW4 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric | C15, C18, C19 |
| 2 | 1.5pF | Capacitor_SMD:C_0402_1005Metric | C21, C22 |
| 2 | 10pF | Capacitor_SMD:C_0402_1005Metric | C23, C25 |
| 2 | 15pF | Capacitor_SMD:C_0402_1005Metric | C8, C11 |
| 2 | 1K | Resistor_SMD:R_0402_1005Metric | R4, R7 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C6, C7 |
| 2 | 220R | Resistor_SMD:R_0402_1005Metric | R6, R17 |
| 2 | Conn_01x23 | Connector_PinHeader_2.54mm:PinHeader_1x23_P2.54mm_Vertical | J1, J2 |
| 2 | USB-TYPE-C-018 | External_Library:USB-C_SMD-TYPE-C-31-M-12 | USB1, USB2 |
| 1 | 0R | Resistor_SMD:R_0402_1005Metric | R8 |
| 1 | 12MHz, X322512MSB4SI | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 2.2u | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 2.7nH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 200R | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 40MHz, X252040MMB4SI | Crystal:Crystal_SMD_2520-4Pin_2.5x2.0mm | Y2 |
| 1 | 470R | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 6.8nH | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | ESP32-C3FH4 | External_Library:ESP32-C3FH4 | U5 |
| 1 | LED, RED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | LED, Yellow | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LMD4737T263-OY1 | External_Library:LGA-6_L4.7-W3.8-P1.65_LMD4737T | MIC1 |
| 1 | RFANT3216120A5T | External_Library:FILTER-SMD_1206-2P-L3.2-W1.6-L | AE1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | SS34 | Diode_SMD:D_SMA | D2 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.275x5.275mm_P1.27mm | U2 |
More from kylaro/firefly-led-controller
6- 4 layers67.7 × 10.5 mm

- 4 layers70 × 10.5 mm

- 4 layers58.3 × 26.2 mm

- 4 layers62 × 10.5 mm

- 4 layers58.3 × 26.2 mm

- 2 layers63.2 × 43.1 mm

Similar boards
- 2 layers34 × 24 mm

Reality from scratch motherboard
uwrealitylabs/Reality-from-scratch-motherboard
RP2040+ICM42688
50 parts1GPL-3.0 - 2 layers50 × 45 mm

- 4 layers45 × 29.2 mm

Pocket 2.66
quintenluyten2/Pocket_2.66_E-reader_PCB
PCB for 2.13" and 2.66" E-ink displays with ESP32-C3, micro-SD card, battery management, and 3 user buttons
88 parts3 - 4 layers90 × 100 mm

- 4 layers70 × 50 mm

Motor power poc
Galacs/motor-power-poc
A POC PCB to test circuit electrical protections and motor control schemes
165 parts - 2 layers123.4 × 123.4 mm

Eink mahjong compass
ikuto0815/eink_mahjong_compass
This repo contains all the files neccesary to build a bluetooth controlled digital mahjong compass.
55 parts4AGPL-3.0 - 2 layers105.4 × 86.5 mm

Good Boy Limiter
JohnanLuca02/BYTE_Electronics
Repository for everything concerning the electronics (PCB, Electrical schemes, BOM, ...) of the robot dog project of the AiTeam called BYTE.
111 parts1 - 4 layers80 × 35 mm

Questions
How big is the FireFlyV3 0 PCB?
It measures 75 × 22 mm and has 4 copper layers, 1.6 mm thick.
What parts does the FireFlyV3 0 use?
61 parts, built around the ESP32-C3FH4, RP2040, W25Q128JVSIQ and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FireFlyV3 0 KiCad files?
From the kylaro/firefly-led-controller repository on GitHub, at the commit this page was made from: the board is FireFlyV3_0/FireFlyV3_0.kicad_pcb and its schematic FireFlyV0/FireflyV0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FireFlyV3 0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask kylaro before reusing the design.