2 layers160 × 113 mm
2 layers80 × 22 mm
Fet module
KyGuy2002/ProjectDMX-PCBPCB designs for projectdmx.us modular prop controller
- Size
- 80 × 22 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 15
- Pads
- 83
- Tracks, vias
- 88, 23
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 26 Apr 2026
- Updated
- 6 Jul 2026
Overview
Fet module is an open-source printed circuit board by KyGuy2002, from the KyGuy2002/ProjectDMX-PCB repository on GitHub. It is a 2-layer board of 80 × 22 mm with 30 parts on 15 nets, routed with 88 tracks and 23 vias.
It is built around the AOD4184A and SK1045B. Its parts include 9 ICs, 8 resistors and 2 capacitors.
Main components
2README
README.mdPCB designs for projectdmx.us modular prop controller
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100Ω | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3, R4, R5 |
| 4 | 10kΩ | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8, R9 |
| 4 | AOD4184A | Imported:AOD4185A | A, B, C, D |
| 4 | SK1045 | Imported:SK1045-LTP | A, B, C, D |
| 4 | ~ | ProjectDMX:Vert Terminal Block p2 | U2, U3, U7, U9 |
| 4 | ~ | ProjectDMX:JST XH Power | U1, U6, U8, U10 |
| 1 | |||
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2 |
| 1 | ~ | Package_DIP:DIP-14_W7.62mm | U4 |
The 28 most common of 30 parts.
Questions
How big is the Fet module PCB?
It measures 80 × 22 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Fet module use?
30 parts, built around the AOD4184A and SK1045B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fet module KiCad files?
From the KyGuy2002/ProjectDMX-PCB repository on GitHub, at the commit this page was made from: the board is fet-module/fet-module.kicad_pcb and its schematic amp-module/amp-module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fet module design in my own project?
Its repository states no licence, so its author keeps all rights: ask KyGuy2002 before reusing the design.
More from KyGuy2002/ProjectDMX-PCB
7- 2 layers80 × 22 mm
- 2 layers80 × 22 mm
- 2 layers65 × 22 mm
- 2 layers80 × 22 mm
- 2 layers80 × 22 mm
- 2 layers52 × 38 mm
Similar boards
- 2 layers32 × 46 mm
General purpose step up
marcusmueller/12V_step_up
General purpose Step-Up converter
26 partsCERN-OHL-S-2.0 - 4 layers100 × 123 mm
Duet2
Duet3D/Duet-2-Hardware
The KiCAD source for the Duet 3d printer controller see www.duet3d.com
356 parts258 - 4 layers100 × 123 mm
Duet3 5+ Ethernet
Duet3D/Duet3-Mini5plus
This repository also contains information in the Mini 2+ : a two driver expansion board for the Duet 3 mini 5+
461 parts12 - 4 layers115 × 140 mm
- 2 layers100 × 100 mm
COPIE 0
AssaadMH/shadow-4wd-motor-shield-pcb
The 24-signal interface board that replaces SHADOW's perfboard wiring — and the two pin conflicts that only appeared on re-checking the spec.
154 parts2MIT - 2 layers54.9 × 99.3 mm
Tool checkout cabinet modules
ealott/tool_checkout_cabinet
An inexpensive, RFID-based door access solution for individual cabinets. Based on Micropython and the ESP8266 MCU.
22 parts2 - 2 layers77.9 × 100 mm
Power distribution
Haxintosh/tiled-pcb-heater
Scalable and modular 3D printer heated bed
216 parts2CERN-OHL-P-2.0 - 2 layers100 × 60 mm
