Skip to the content
2 layersOrigami robot, the printed circuit board in 3D

An origami vibration robot that walks

Copper layers
2
Thickness
1.6 mm
Parts
4
Nets
3
Pads
16
Tracks, vias
15, 3
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
21 Jun 2024
Updated
18 Jun 2025

Overview

Origami robot is an open-source printed circuit board by kvriet, from the kvriet/Origami-vibration-robot repository on GitHub, published under the MIT licence. It is a 2-layer board with 4 parts on 3 nets, routed with 15 tracks and 3 vias.

It is built around the MK-12C02 G1.5. It belongs with the robots and motor control boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.

Main components

1

README

README.md

Origami-vibration-robot

Workshop for making origami vibration robots that walk. CC BY-NC Katrien van Riet

Robot

Table of contents

  1. The Project
  2. Materials
  3. Assembly

The project [blocked]

This project allows children to build their own origami vibration robot. This way, children can explore folding patterns and combine these with a vibration motor to see what works for making a little robot that moves.

Once the robots have been folded, it's a nice idea to have children race their robots again each other on a flat track (maybe inclined a little).

Children can also design their own robot:

Robot walking

What do I need? [blocked]

To make the robots, you need:

  1. Origami paper (15x15cm)
  2. Vibration motor
  3. Coin cell (2032)
  4. Tape
  5. Googly eyes
  6. Optional: decoration

How to make the robots [blocked]

Follow the folding manual: https://github.com/kvriet/Origami-vibration-robot/blob/main/Folding%20manuals/Fold%20a%20vibration%20robot%20v1.pdf Then tape the leads of the vibration motor to the two sides of the coin cell. Tape the vibration motor + coin cell onto the origami robot (if you want you can use double-sided tape here. Tape for fixing photographs works well here).

The robots in the pictures have custom PCBs designed by Dico Kruining and me, but tape also works. Many thanks to Dico for helping me design the PCBs and soldering them!

Your robot is now ready, but you can also decide to decorate it. Here's an example of a decorated robot:

Robot decorated

Parts

4
QtyValueFootprintReferences
1MK12C02Button_Switch_SMD:SW_SPDT_PCM12SW1
1Motor_DCLibrary:Vibration_motorM1
1RS PRO CR2032 Battery ClipLibrary:BatteryHolder_RS_PRO_1x2032BT1
1SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP1

Similar boards

  • 2 layers18.5 × 26 mm24g2usb rp2350zero, the printed circuit board in 3D

    24g2usb rp2350zero

    joypad-ai/joypad-os

    Universal controller firmware for building adapters, dongles, and custom controllers.

    4 parts1.7kApache-2.0
  • 2 layers116 × 33 mm966595-1 and 963356-1, the printed circuit board in 3D

    966595-1 and 963356-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    4 parts1.2k
  • 2 layers19 × 18 mmDaughter board, the printed circuit board in 3D

    Daughter board

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    4 parts915
  • 2 layers24.8 × 24.8 mmNrf24 breakout, the printed circuit board in 3D

    Nrf24 breakout

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    4 parts803MIT
  • 2 layers26 × 20 mmCap chain, the printed circuit board in 3D

    Cap chain

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    4 parts744MIT
  • 2 layers34.7 × 20 mmXG Station Power MSI, the printed circuit board in 3D

    XG Station Power MSI

    osy/XG_Mobile_Station

    Open source eGPU dock for ROG Ally and ROG Flow

    4 parts712CC-BY-4.0
  • 2 layers20.3 × 24.5 mmJack power input, the printed circuit board in 3D

    Jack power input

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    4 parts546MIT

Questions

What parts does the Origami robot use?

4 parts, built around the MK-12C02 G1.5. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Origami robot KiCad files?

From the kvriet/Origami-vibration-robot repository on GitHub, at the commit this page was made from: the board is KiCAD/Origami robot v4/Origami robot.kicad_pcb and its schematic KiCAD/Origami robot v4/Origami robot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Origami robot design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).