2 layers47.6 × 27.3 mm
2 layers
Pcb for cnc for pcb
Kuba-Dvorak/PCB_MakerA simple, and not a very good pcb graver machine, using arduino nano, RPI, NEMA17s, GT2, MGN9 & T8.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 30
- Pads
- 72
- Tracks, vias
- 106, 3
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Jul 2026
- Updated
- 10 Oct 2026
Overview
Pcb for cnc for pcb is an open-source printed circuit board by Kuba-Dvorak, from the Kuba-Dvorak/PCB_Maker repository on GitHub. It is a 2-layer board with 27 parts on 30 nets, routed with 106 tracks and 3 vias.
Its parts include 7 capacitors, 1 resistor and 1 diode. It belongs with the robots and motor control boards of this library.
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TestPoint | Connector_Pin:Pin_D1.0mm_L10.0mm | 5Vacces1, Enable1, Pwm1, Pwm2, Xdir1, Xstep1, Ydir1, Ystep1, Zdir1, Zstep1 |
| 7 | C_Small | Capacitor_THT:CP_Radial_Tantal_D5.0mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7 |
| 7 | SW_Push | Button_Switch_THT:SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm | Estop1, Xmax1, Xmin1, Ymax1, Ymin1, Zmax1, Zmin1 |
| 1 | LED | LED_THT:LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O3.81mm_Z1.6mm | D1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | arduino | Module:Arduino_Nano | A1 |
Similar boards
- 2 layers77.4 × 77.4 mm
CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm
- 2 layers40 × 40 mm
- 2 layers22 × 42 mm
Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm
PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm
AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm
Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223
Questions
What parts does the Pcb for cnc for pcb use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb for cnc for pcb KiCad files?
From the Kuba-Dvorak/PCB_Maker repository on GitHub, at the commit this page was made from: the board is pcb_for_cnc_for_pcb/board/board.kicad_pcb and its schematic pcb_for_cnc_for_pcb/board/board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb for cnc for pcb design in my own project?
Its repository states no licence, so its author keeps all rights: ask Kuba-Dvorak before reusing the design.