

Kicad spi nor opi
SPI NOR flash module (W25QXX DataFlash Board) for orange pi/raspberry pi
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 11
- Pads
- 26
- Tracks, vias
- 65, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 6 Jun 2019
- Updated
- 23 May 2020
Overview
Kicad spi nor opi is an open-source printed circuit board by ktkd, from the ktkd/rpi_spi_board repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 5 parts on 11 nets, routed with 65 tracks and 0 vias.
Its parts include 2 connectors, 1 resistor, 1 IC and 1 diode.
README
README.mdOrange pi spi board
KiCAD project with SPI NOR flash module (W25QXX DataFlash Board) for orange pi/raspberry pi
This board allow you to boot Orange PI directly from SPI Nor flash without SD card.
for reference (http://linux-sunxi.org/Bootable_SPI_flash)
sunxi-fel output from orange pi pc and this board with 25q16 spi chip:
$ ./sunxi-fel spiflash-info
Manufacturer: Unknown (C8h), model: 40h, size: 2097152 bytes.Components:
SPI flash SOIC-8 25 series (for examble 25q08 and above)
PLD-6 (DS1021-2x3S) 2.54mm (for jumper selector)
PBD-8 (DS1023 2x4) 2.54mm (for orange pi connector)
0805 resistor 10Ohm (for led)
0805 led connect board to red pins (pins 17-24 onboard SPI0)




Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Jumper_wp/hold | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J2 |
| 1 | LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | Opi_conn_1 | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J1 |
| 1 | R_Small | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | W25Qxxxx | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U1 |
Similar boards
- 2 layers98 × 27 mm

- 2 layers21 × 33 mm

24g2usb pico2w
joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
5 parts1.7kApache-2.0 - 2 layers53.2 × 59.6 mm

A10 OLinuXino Lime Rev B SHIELD TEMPLATE
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
5 parts1.5k - 2 layers30 × 11 mm

Main control board servo tester
jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.
5 parts1.1k - 2 layers78.8 × 35.3 mm

KiCadTest
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
5 parts915 - 2 layers50 × 23 mm

- 2 layers43.2 × 28.5 mm

- 2 layers20.3 × 15.2 mm

L0 light sensor
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.
5 parts546MIT
Questions
What parts does the Kicad spi nor opi use?
5 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Kicad spi nor opi KiCad files?
From the ktkd/rpi_spi_board repository on GitHub, at the commit this page was made from: the board is kicad_spi_nor_opi/kicad_spi_nor_opi.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Kicad spi nor opi design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).